bumonskateboard6 Posted January 29, 2015 Report Share Posted January 29, 2015 Picked up a new (to me) car last month and couldn't make it a month with just a stock stereo. I didn't want to cut up the car since it's so new, and I didn't want to throw a ton of weight in the trunk or lose the ability to use the trunk for storage. Cleanness was also the name of the game for this install, it's not crazy clean, but good enough for me Solution I came up with: DC LVL 3 12" with full carbon fiber package (for looks only, I know) Hertz HDP1 Amplifier Custom harness built for a LOC Knukonceptz RCA/power/speaker wire Fiberglass box roughly 1 cubic foot First some pics of the car from a trip up a mountain that I did with some bikes 2011 BMW 335i Sedan with BMW's performance edition package (bumps HP and Torque by roughly 30 each through a computer tune) Now onto the Install: Finding a place to put the amp Harness and LOC into stock amp "Industrial strength" velcro, it seriously is ridiculously strong for velcro Amp positioned good enough without having to cut stuff and I still have access to everything Running wires 16 ton hydraulic crimp is on there forever Fuse holder Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted January 29, 2015 Author Report Share Posted January 29, 2015 Stock battery ground in the trunk is convenient Running along stock wiring FTW That feeling when everything works on the first try Sub box bolted in place. Didn't get pictures but essentially I poked small holes in the carpet and ran metal strapping across the back of the carpet for rigidity/strength then rubber gasket/washer/nut inside the box. Full CF sub cause if I'm only doing 1 sub might as well be pretty Installed floor out Installed floor in Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
elflako17 Posted January 29, 2015 Report Share Posted January 29, 2015 nice and clean man 2010 Mazda 3 *Rebuild Time* Subs - (2) AA Mayhems 12's Sub amp - (1) Populus Audio TPA 6500 Headunit - Pioneer App Radio 2 Batteries - XS Power (1) D3100 up front | 6 XP950 rear Wire - Sky High 1/0 Gauge wires and RCA's and steve's VM1 Alternator - Singer 260 Externally Regulated Front Stage: (2) PRV Audio 10W650A (4) PRV Audio 8MR500-PhP-4 (4) DS Bullet Tweets | (2) 6.5 Components (Rear doors) Mids & high Amp : (2) Populus Audio 100.4 Processor: Rockford 3sixty.3 The Build Log : http://www.stevemeadedesigns.com/board/topic/175922-2010-mazda-3-2-aa-mayhems-12-pg14-new-video/page-11 Link to comment Share on other sites More sharing options...
Aj11 Posted January 29, 2015 Report Share Posted January 29, 2015 real clean build man, exactly what I'm.looking for my second (wifes car) lots of sound without allot of room..and weight.(the car is SC) that build looked to easy tho... prefab or custom box? also i had to look at your profile pic like 6 times...really thought it was something dirty. but i was wrong just a sweet Lil pussy......cat. Is that bullz 0g? i really like that wire for cca. jvc deck stinger 1800 front hc 2000 kinetic rear 2 runs of 1/0g big 3/4 ct 60.4 2 ct 1400.1 ct EXO 15 d1 lots of deadner type r comps front stage 6 kicker tweets rear stage lots of great stuff coming soon ho alt more bats ct comps for front stage more deadner sweet amp rack lots of L.E.D lights new deck (thinking 80 prs, or flip out) Link to comment Share on other sites More sharing options...
SIDE SHOW Posted January 29, 2015 Report Share Posted January 29, 2015 nice car bud Link to comment Share on other sites More sharing options...
Wood Posted January 29, 2015 Report Share Posted January 29, 2015 That is perfect!!! Great Job 2011 Nissan Altima aka Red Ruby HEADUNIT: Pioneer AVH X2700BS ELECTRICAL: -Singer 230a -Northstar gr34 -(2) Northstar SMS220 w/ Custom Terminals from 12V Metalworkz -100% Welding Cable FRONT STAGE:-(2 Sets) Hertz HSK165 -Hertz HSK130 -Ampere Audio 125.4 SUB STAGE: -(3) Sundown Audio SA REV2 12's -Ampere Audio 3800.1 V2 MISC (NON AUDIO RELATED): -Interior & Exterior Lights LED -Gloss Black Roof (PAINTED) -15% Front, 5% Rear Tint -Roof Spoiler -20" TSW Snettertons (20x8.5 front, 20x10 rear) -Custom Projector Retrofit (FX-R 3.0, 6.5k HID, Morimoto Mini H1 (faux projector), Quad Starry Night Halos) ----- COMING SOON!! -Aftermarket Fog Lights -Custom Painted Engine Covers My Build Log: http://www.stevemeadedesigns.com/board/topic/169869-woods-2011-altima-aka-red-ruby-new-video-more-updates/page-109 Retrofit Build Log: http://www.stevemeadedesigns.com/board/topic/185787-hid-projector-retrofitting-diy-by-wood/#entry2765346 Link to comment Share on other sites More sharing options...
BoomZoom808 Posted January 29, 2015 Report Share Posted January 29, 2015 love the simple clean stuff like this nice ride 2010 Mazda 3s 2.5L Pioneer DEH-X9600BHS Knu OFC 1/0 SS Platinum AGM / XS Power XP750 Alpine PDX F-4 / Morel Maximo 5 + Coax 5 IA 10.1 / SSA XCON 12 Link to comment Share on other sites More sharing options...
hdorre Posted January 29, 2015 Report Share Posted January 29, 2015 Mmm... I love e90s... well done.. On 5/8/2011 at 7:38 PM, Kranny said: On 5/8/2011 at 7:35 PM, 'Maxim' said: It hurts me inside when I read stuff like this and remember you're 15 LMFAO so true Mitsubishi 3000GT (Old Build) Headunit: Pioneer 80PRS Frontstage: (2) McLaren Audio MLT-2 Tweeters & (4) PRV Audio MR Series Neo 6.5" Mids Substage: 4 15" Hybrid Subs - Tantric Motors & Sundown Softies Amps: Banda 2.4D Amp (Tweets), American Bass VFL 350.4 (Mids), and (2) Ampere 3800s Electrical :Singer 260A Alt & JY Power Lithium 2005 Chevy Colorado Ext Cab Headunit: Pioneer 80PRS Frontstage: 4 PRV 700Ti Tweets & 6 10" Delta Mids on 3000wrms Substage: 6 Fi BTL 18s in a 4th Order Walkthrough on 3 Wolfram 4500s Electrical: Singer "390" and JY Power My Official Feedback Thread Link to comment Share on other sites More sharing options...
bumonskateboard6 Posted January 29, 2015 Author Report Share Posted January 29, 2015 nice and clean man Thank you! real clean build man, exactly what I'm.looking for my second (wifes car) lots of sound without allot of room..and weight.(the car is SC) that build looked to easy tho... prefab or custom box? also i had to look at your profile pic like 6 times...really thought it was something dirty. but i was wrong just a sweet Lil pussy......cat. Is that bullz 0g? i really like that wire for cca. Thanks man, the wiring is Knukonceptz 4 gauge OFC, it's about a 20 inch run and is likely overkill, but good stuff! nice car bud Thanks! That is perfect!!! Great Job Small, but good enough...for now doors and stock subs might get some upgrades love the simple clean stuff like this nice ride Thank you! Mmm... I love e90s... well done.. I'm starting to love this one, thing is ridiculous compared to my Acura Tl speed-wise! Current Systems: 2011 BMW 335i Hertz HDP1 DC LVL3 12" Full Carbon Fiber 2002 Acura TlKenwood DNX9980HD2 DCLVL4 12" Subs with LVL5 Parts D.7 CoilsDC 3.5kHertz HSK-165 up front HCX-165 RearHertz HDP4 AmpDC Power Engineering 260 Amp AltBig 3 and amp powered with KNU 1/0XS Power D2400 Up Front i pulled out my dick in class many of times and had it shown. get over it bitch...stupid open legged hairy beavered bitch... going over rms = smaller box, under rms = bigger box... Low voltage doesn't blow amps. That's a myth. A router that does the sub holes makes rounded edges also? Link to comment Share on other sites More sharing options...
Smoove Posted January 30, 2015 Report Share Posted January 30, 2015 Nice clean sub install. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.