Ruben0987 Posted February 8, 2015 Report Share Posted February 8, 2015 I'm not even sure where to begin I bought a new amp for my subs for ($82)!! Audiopipe 30001d and it was all still in the plastic my Kicker vx are rated at 750rms 1500w Peak should I wire them at 1-4 Ohm because 1 Ohm will blow my subwoofer if I should wire them at 4ohms can someone please explain how to wire it and connect it to this amp that has to connections cause it 2-1500 straped Thanks I'm kinda a noob at this stuff as you can see Link to comment Share on other sites More sharing options...
dangaranga Posted February 8, 2015 Report Share Posted February 8, 2015 just so you quit posting. here have a nice day http://a248.e.akamai.net/pix.crutchfield.com/ca/learningcenter/car/subwoofer_wiring/2DVC_4-ohm_mono.jpg Brandon 2000 Furd Ranger supercab 4x4 System: welding wire throughout the truck USalts 390amp Hairpin Juicebox in stock location 8 Banks of maxwell supercaps 2 American Bass Vfl 1100.1 wired to .35 each 2 Fi Audio Sp4 18's ( the DD sc 9918's smoked) Pioneer radio with Soundstream PA mids Powered by a nice sized soundstream 2 channel It's pronounced (dain-ja rain-ja) 2001 2 door focus 1 DD9918 SC Link to comment Share on other sites More sharing options...
DubNDodge Posted February 8, 2015 Report Share Posted February 8, 2015 did your mommy and daddy not give you enough attention when you were a kid? '01 Dodge Stratass Sealed Trunk Build Log 2008 Honda Fit Sport Build Log On 10/3/2013 at 10:00 AM, ROLEXrifleman said: Anyone who says they knew everything they wanted out of life at 19 can go suck a bag of dicks cause they are lying to themselves or brought up in a cult. Link to comment Share on other sites More sharing options...
Ruben0987 Posted February 8, 2015 Author Report Share Posted February 8, 2015 What are you taking about not give me attention? Link to comment Share on other sites More sharing options...
Ruben0987 Posted February 8, 2015 Author Report Share Posted February 8, 2015 And sure I'll quit posting but how do I hook that up to a Audiopipe 30001d? Considering it has 2 positive and negative places? Link to comment Share on other sites More sharing options...
dangaranga Posted February 8, 2015 Report Share Posted February 8, 2015 jesus fucking christ. YOU HOOK THE RED WIRE TO THE POSITIVE AND THE BLACK WIRE TO THE NEGATIVE. theres two outputs per terminal for sake of having more connection points, they are paralleled so it doesnt matter which terminal is used for pos and neg Brandon 2000 Furd Ranger supercab 4x4 System: welding wire throughout the truck USalts 390amp Hairpin Juicebox in stock location 8 Banks of maxwell supercaps 2 American Bass Vfl 1100.1 wired to .35 each 2 Fi Audio Sp4 18's ( the DD sc 9918's smoked) Pioneer radio with Soundstream PA mids Powered by a nice sized soundstream 2 channel It's pronounced (dain-ja rain-ja) 2001 2 door focus 1 DD9918 SC Link to comment Share on other sites More sharing options...
Ruben0987 Posted February 8, 2015 Author Report Share Posted February 8, 2015 Dude why are you being such a dick honestly if I knew I wouldn't post for help so u need to chill the fuck out Link to comment Share on other sites More sharing options...
Ruben0987 Posted February 8, 2015 Author Report Share Posted February 8, 2015 And actually there 2 amps strap on 1 so what your saying is it doesn't matter what side the positive and negative go in? This is all I needed to know Picks so u know what I mean http://i1.r24.me/B0VwOqnbw0WJ.jpg Link to comment Share on other sites More sharing options...
dangaranga Posted February 8, 2015 Report Share Posted February 8, 2015 I'm being a dick because you are spamming the forum before allowing any time for people to respond. chill the fuck out for a minute before you get banned by N8. there are two pos terminals and two neg terminals. they are both paralleled. so what that means is you can put your positive lead in either pos terminal and the same for the neg, they dont have to be both filled. The amp is strapped internally so dont worry about that, and those amps are only stable down to 2 ohm nominal on the outputs, so wire to 4 ohm as shown in the diagram and go from there Brandon 2000 Furd Ranger supercab 4x4 System: welding wire throughout the truck USalts 390amp Hairpin Juicebox in stock location 8 Banks of maxwell supercaps 2 American Bass Vfl 1100.1 wired to .35 each 2 Fi Audio Sp4 18's ( the DD sc 9918's smoked) Pioneer radio with Soundstream PA mids Powered by a nice sized soundstream 2 channel It's pronounced (dain-ja rain-ja) 2001 2 door focus 1 DD9918 SC Link to comment Share on other sites More sharing options...
Wade Copeland Posted February 11, 2015 Report Share Posted February 11, 2015 Wire the subs shown in the diagram he shared earlier.... connect your negative speaker wire on the far left and the positive on the far right of the speaker input terminal Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.