Kory Posted February 17, 2015 Report Share Posted February 17, 2015 Hello Everyone, I have two 4x6 speakers that are fairly new.I have used them a bit but now they no longer produce any sound when hooked to the head unit.I know that the wiring is all good because I hooked up a new speaker to that channel and it worked fine.The 4x6's both look new there are no rips in the cone and no dents or anything on the magnet.What could be causing them to not work? Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
mothra Posted February 17, 2015 Report Share Posted February 17, 2015 separated tinsel lead, bad coil, bad terminal to connector, etc.... try plugging it up than pushing the speaker in by hand. if nothing changes, nothing changes You don't know what you don't know, till you don't know Link to comment Share on other sites More sharing options...
islandpride684 Posted February 17, 2015 Report Share Posted February 17, 2015 Do a battery test on them, grab one from your tv remote...pos to pos, neg to neg...if nothing happens then your speakers are blown... Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
Kory Posted February 17, 2015 Author Report Share Posted February 17, 2015 ok.Thanks guys.ill try that when I get home. Link to comment Share on other sites More sharing options...
Kory Posted February 18, 2015 Author Report Share Posted February 18, 2015 ok.guys hanks for the help turns out they are completly blown anybody know what to do with blown ones salvaged for parts maybe? Link to comment Share on other sites More sharing options...
gally Posted February 18, 2015 Report Share Posted February 18, 2015 red cross might be able to take them in... 2010 Chevrolet Cruze Radio --- pioneer mvh-200vbt Front/back --- alpine type s 6.5" Sub Control --- Pac LC1 Sub Amp --- GZPA 1.4K Sub --- GZNW 15XSPL D1 Battery - GZBP 12.2500X Link to comment Share on other sites More sharing options...
SIDE SHOW Posted February 18, 2015 Report Share Posted February 18, 2015 turn them into a clock, or rip the magnets off and make a magnetic door holder or something for a steel door ect----- Bin Link to comment Share on other sites More sharing options...
Kory Posted February 19, 2015 Author Report Share Posted February 19, 2015 i just gave them to a friend.he thinks he can make them work.i dont care if he just trashes them though.they were only $20 for a pair. Link to comment Share on other sites More sharing options...
SIDE SHOW Posted February 20, 2015 Report Share Posted February 20, 2015 make some ghetto headphones Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.