Recently Browsing 0 members
No registered users viewing this page.
My 2005 Jeep Grand Cherokee Wk that I've built myself .
* + 7,000 RMS
* Over 2,000 Working Hours !
* 6 - SPL PRO Series Multiple World Record Winner SUBS
* 3 - PRS-D 2000SPL Series Mono Amps
* 1 - X3.2k4 World's Most Powerful 4 Channel Amp
* 4 - 8' SPL series Mids
* 2 - 6.5' SPL series Mids
* 2 - SPL series Tweets
* 5 - 95a AGM Batteries
* 6 - Runs 1/0 Silver Tinned OFC Copper Wire
* BC RACING Coilovers
* Tons of Metra Ballistic Insulation
* Stinger DVM
* Singer 275A Alternator
* CTEK MXS 25 500a Charger
* KNU Conceptz CRYSTAL Cable Rca's
* 6 - KNU Conceptz 300a Fusing
* Knu 300a Fuses
* Rockford Fosgate Fusing , wiring ...
*Tool Maker USA Custom Made Battery Terminals
* Pac Audio Interface
* Russian Baltic birch wood
* 6 Precision Ports .....
* Custom Built Battery And Amp Racks...
Much Much More.....
Project Flexington: 160.3db @ 37hz!! Parallel 6th order walk through, DC Neo Elite 18s, 4 DC 5.0ks, JY Lithium, 12 banks of XS CapsBy the_garynator
*************[Note: Since photobucket decided to nerf everyone's accounts, a lot of the pictures in this thread are gone. I intend to fix all of the posts but it will take quite a while. Photos start on page 29 currently. In the meantime all of the photos are available on Facebook by searching #projectflexington and many are on Instagram under the same hashtag. Thanks for looking and please don't be afraid to comment! ]*************
So figure it is time to start a build log for my 6th order wall. Been working on it for a few weeks now. I'll start by posting the equipment I'm using for the build.
2 nsb170fts and 2 stinger group 31s:
3 banks of super caps:
2 singer 320amp alternators (these came with the truck, I'm currently in the process of redoing the bracket to strengthen it and add a tensioner but I'll elaborate later):
4+ spools of skyhigh 1/0, knukonceptz 4/0 ofc for alternators (will post pictures later)
Terminals, marine grade ring terminals lugs, properly crimped with double wall adhesive lined heat shrink:
Subs are 2 sundown x15s rev 1(will be rebuilding for level 6 18s at a later date):
Sub Amp, kicker warhorse:
Head unit and tweeters, Sony dsx-s210x and 4x Earthquake Screamers, 1.5" 150wrms per pair silk Dome tweeters with replaceable voice coils:
Mid bass, 4x dayton audio 10" pa woofers, 300rms each:
Mids are tbd, probably 2 8" midrange speakers.
Lots of Baltic birch:
If you enjoy, please comment!
By Rich Schenk
Installed a couple weeks ago my cpillar slide in wall For 6 ab xfl 1222s on 2 dc 5ks.
3 top on 1 dc5k @1.3 ohms and 3 bottom on another dc5k @ 1.3 ohms.
Have blown the bottom middle woofer now twice.
First time thing I went to hard on it being that it took months to finish and killed the coil.
2nd one was rushing to get it playing for slammology. Broke it in for 3 hours @ 40 and 30 hz on a dc5k @ 4ohns 900 something watts
Went to install it the next day screwed up poked surround like a idiot. Fixed it with shoe goo
Played fine all weekend till my 4th demo at slammology then that infernal slinky sub sound.
What am I doing wrong?
1. this is my first wall
2. First time running 6 subs
3. First time running this kind of power and running 2 dc5k to 1 enclosure
4. Set amps with dd-1 to older 5k cause seemed to be lower of the 2 amps. Set with -5 db track
5. Gain matched both amps to the older 5k with cc-1
6.slide in wall is top L port
7. Almost seems like bottom 3 subs move more then top ones ( but not 100 percent on this )
5 broken in subs and one new one as soon as I buy another one from ab.
Please help I am pulling my hair out trying to figure this out and can't afford to keep replacing subs.
Now have 5 good and 3 bad subs.
Who's Online 3 Members, 0 Anonymous, 873 Guests (See full list)