gibblegeibel Posted March 14, 2015 Report Share Posted March 14, 2015 ok i have a soundstream rubicon 250.2 for my door speakers in my truck. the speakers are jbl 6 1/5 speakers that are rated at 75 watts rms. my question how should i hook up the sound signal to the amp since it has the rca connections on the amp for the low level and the speaker plug in for the high level. below is the a link to a picture of what i am talking about. which is better recommend for 2 6/15 speakers for my doors. the high leve input or the low level input? http://images.sonicelectronix.com/images/2397170/big/rub2250.jpg Link to comment Share on other sites More sharing options...
la negra Posted March 14, 2015 Report Share Posted March 14, 2015 use the rca's if you a aftermarket radio or high level for stock radio tapped into your speakers Link to comment Share on other sites More sharing options...
gibblegeibel Posted March 14, 2015 Author Report Share Posted March 14, 2015 ok i forgot to mention i have an aftermarket radio. thanks for the advice Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted March 14, 2015 Report Share Posted March 14, 2015 low level > high level Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted March 14, 2015 Report Share Posted March 14, 2015 If you have an aftermarket head unit with low level out this shouldn't even be a question. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Miguels Posted March 14, 2015 Report Share Posted March 14, 2015 low level.. the high level will introduce clipping and distortion with minimal volume on the HU my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.