aculous Posted March 19, 2015 Report Share Posted March 19, 2015 So I have two vents in the back of my car. A lot like cab vents in a pickup. I think I need to replace mine because every other vent I have seen is a one way type vent, as it it has rubber flaps, opens when it needs to then closes. I don't want to get rid of them because from everything I am looking at I need them and are beneficial. Problem is the ones I have are completely open, So I have dust and dirt and rocks coming into to the cabin of my car. I am guessing this isn't supposed to happen. Ideas of where I can get a new set for a dodge? I think they are about 5x6. I was thinking of maybe seeing if I dodge just has a replacement but I was wondering if you guys have any ideas. Link to comment Share on other sites More sharing options...
95legwagon Posted April 12, 2015 Report Share Posted April 12, 2015 Dealer usually has them, normally stocked for body shops lol, at least they are super easy to replace.... Shouldnt be expensive either i think there real i was looking through that guys stuff he sells and it looks like he finds stuff at auctions and just sells it Yea, it looks like someone got the mids about a month ago....shit. If I had a whole Hertz front stage my ears would jizz all over my cheeks. / LOL My Low Budget Build: Green 1995 Subaru Legacy wagon 147k- $1K headunit- pioneer premier deh-p650-$25 4 Lead acid batts. 1 up front and 3 in back- vented outside.- $50 4 vvme L11 10"s <- $30 shipped a piece 6 cu. ft box (after displacment) tuned to 32ish hz with 10 inch sonotube. -about $50 all together maybe a lil more 2 aspm 1300 strapped Selenium 6"s in the front doors on headunit power- for now -$20 quantum tweets in door-for now -$10 boston acoustic 5 1/4 in rear doors- for now-Free big 3 1/0 and 4awg throughout. roof sound deadened (not peel n seal ftw)-free on 80 amp alt (bench tested to put out 100 amps faithfully) <--?-$10 for test about $430 for everything<----Not bad at all still gotta add 3 way crossover, amp for front and rear door speakers and maybe eq Link to comment Share on other sites More sharing options...
aculous Posted April 13, 2015 Author Report Share Posted April 13, 2015 Dealer usually has them, normally stocked for body shops lol, at least they are super easy to replace.... Shouldnt be expensive either yea I was kinda hoping there was going to be something aftermarket I could pickup. I gotta go get my transmission flushed anyway so I'll pick it up while I'm there. Pulled the driver side vent and saw that yup...they were supposed to have rubber flappers on them....two of the 30 or so were left. May be part of my problem. Link to comment Share on other sites More sharing options...
Pioneerchuck Posted April 19, 2015 Report Share Posted April 19, 2015 Yeah most body shops have them around and for vehicles you can buy them online. I just pulled mine out and welded the holes closed. Lol Link to comment Share on other sites More sharing options...
Ahmed Johnson Posted April 19, 2015 Report Share Posted April 19, 2015 Have you tried rock auto? Link to comment Share on other sites More sharing options...
reedal Posted April 19, 2015 Report Share Posted April 19, 2015 Go to a pick-a-part or pick-n-pull or whatever junkyard type deal is local to you where you can go find your vehicle and pull parts you need off of it. Better than dealership pricing. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
aculous Posted April 20, 2015 Author Report Share Posted April 20, 2015 Yea need to go back to the pickapart. Probably just seal them completely though. Basically all my noise is coming from these stupid things Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.