TaurusBass1021 Posted March 31, 2015 Report Share Posted March 31, 2015 Well I broke down and went and bought a fully loaded custom rebuilt 12" Fi BL sub from a guy off caraudioclassifieds.org. I have decided that I want to start entering into some comp's as soon as there is one near me. I have always wanted to compete but have never owned a sub/amp setup like this until now. Just looking for all the advice/help that I can get right now to design/build a box for both competitions and daily. Vehicle: 2000 Ford Taurus Max Height: 14in Max Width: 34in Max Depth: 36in Comp Box Specs 2.5cuft tuned @45hz Double Baffled/Flush Mount Sub Daily Box Specs 3cuft tuned @30hz Double Baffled/Flush Mount Sub Powered by Hifonics BRZ1200.1D Any and all help with this build will be greatly appreciated. I did look into having woofer warehouse or RamDesigns to do a custom design for me. I would design it myself but I have no way to design it myself right now. I want to do a kerf port on my daily box for looks if thats not too much to ask for. Building the box is the best part and I want to make sure that it is done right and match the sub as best possible. Below are some pics and specs of the custom Fi Bl 12 Custom rebuilt FI BL 12 with a TI basket 2. Specs: Dual 1.5 ohm 1500 rms *FI BL motor *TI Basket *Sundown Zv2 cone *2 stiff linear 10" spiders *D1.5 ohm flat wound 8 layer coil *Genesis Carbon Fiber Dust Cap Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted March 31, 2015 Author Report Share Posted March 31, 2015 Sub will be powered by a Hifonics BRZ12001.d mono block amp. Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted March 31, 2015 Author Report Share Posted March 31, 2015 Max space available in my 2000 Ford Taurus trunk. Height: 14 in Width: 34 in Depth: 36 in Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted March 31, 2015 Author Report Share Posted March 31, 2015 Bump come on there's got to be someone that can help me out or point me in the right direction. Link to comment Share on other sites More sharing options...
Hugh G. Rection Posted March 31, 2015 Report Share Posted March 31, 2015 Im sure joe dirt will be jumping on this one like a bitch in heat shortly..... Owner of BigAss Ports Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted March 31, 2015 Author Report Share Posted March 31, 2015 Bump Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 bump anyone able to help me out? Link to comment Share on other sites More sharing options...
Jeremie Dufresne Posted April 1, 2015 Report Share Posted April 1, 2015 Is the box for a trunk? Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 Yes its for a trunk. Its not currently sealed but was thinking about sealing it off but have never did anything like that before and not sure what would be the best product to seal it off. Link to comment Share on other sites More sharing options...
TaurusBass1021 Posted April 1, 2015 Author Report Share Posted April 1, 2015 Bump Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.