darryl2727 Posted July 5, 2015 Report Share Posted July 5, 2015 49 wide 20 high 36 deep need help with box and port area Link to comment Share on other sites More sharing options...
Inetba Posted July 5, 2015 Report Share Posted July 5, 2015 Alright Darryl, slow down a bit, we need more information from you in a format that includes spacing and grammar. So we have Two SP4 18s, The amplifier is an Adassa Warlord. 5k watts RMS @ 1 ohm. Not sure what " will be using epicenter" means. Box will be 20" tall, 49" wide, and 43" deep. Being away from the rear tailgate will make things difficult as subs need a wall to load against. after subtracting width of materials that gives you a box of roughly 19 cubic feet. What would you like the box tuned to? What frequency? Link to comment Share on other sites More sharing options...
darryl2727 Posted July 5, 2015 Author Report Share Posted July 5, 2015 Would like 33hz epicenter. Is the audio control bass enhancement the last box was 3 inch for back gate 21.5 cf Link to comment Share on other sites More sharing options...
darryl2727 Posted July 5, 2015 Author Report Share Posted July 5, 2015 Can any help me out???? Link to comment Share on other sites More sharing options...
reedal Posted July 5, 2015 Report Share Posted July 5, 2015 It's only been an hour and a half. Chill. Help doesn't come at the snap of your fingers. The box guru's have lives just like you do SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
darryl2727 Posted July 7, 2015 Author Report Share Posted July 7, 2015 Can any one help me out ?? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.