SoundQubed/Fi Blazer - 4 Fi Team 18’s on 16k (rebuild time!)

[Karkov]

predrill some screws and just screw it.....seal it with whatever wont blow out during bass, lol, idk.............

[Mr DeeBeez]

Made a right angle section of wood to run along the entire seam that let loose. Slapped a shit ton of glue on the two sides, and screwed it in. Let it dry overnight and pretty sure it solved my problem! For now at least

 

Edited July 30, 2017 by Mr DeeBeez

[Mr DeeBeez]

Got my new headlights put on. Love the look. Will take a little bit of adjusting to get them to line up with the grill properly. But they look so much better than stock!

Before:

After

Edited July 30, 2017 by Mr DeeBeez

[bsneon98]

Box fix looks like it will hold!

Oh and that front end looks mean now

[PositiveCrew]

I'm planning on running a similar setup in a Blazer soon. SQ3500 + SQ Q4-90.

So you have two runs of 1/0 going to the back. Do you have a 3500 with dual inputs? If so, how do you achieve that and also power the Q4?

And how many fuses, located where, and of what size?

Thanks a ton, really been enjoying following this build log

[Mr DeeBeez]

I have 4 runs total. 2 power 2 ground. You can't see the battery but I have an xs power xp3000 under the 4 channel behind the beauty panels. So from the battery in back I have 2 runs of power and 2 runs of ground going to the 3500, and a run of 4g going from battery to 4 channel. It's all shown in my build log.

As for fuses, I have 2 on the power runs under the hood, two on the runs right before the battery, and two from battery to 3500. So 6 total. All 150a fuses I believe.

Edited October 4, 2016 by Mr DeeBeez

[PositiveCrew]

I have 4 runs total. 2 power 2 ground. You can't see the battery but I have an xs power xp3000 under the 4 channel behind the beauty panels. So from the battery in back I have 2 runs of power and 2 runs of ground going to the 3500, and a run of 4g going from battery to 4 channel. It's all shown in my build log.

As for fuses, I have 2 on the power runs under the hood, two on the runs right before the battery, and two from battery to 3500. So 6 total. All 150a fuses I believe.

Ahh okay.

I couldn't see that 4GA run, since it's hidden, and that was my main question

Thanks a ton for the clarification

[Mr DeeBeez]

Figured I had another xp3000 sitting in my house for like a year, I might as well put it in my truck. Made a platform of 2x4's on the other side of the box and tucked it away under the amp rack. Worked out pretty well. So now there's an xp3000 hidden under each amp.

All tucked away and hidden

 

Edited July 30, 2017 by Mr DeeBeez

[Mr DeeBeez]

Plastidipped the chrome strip on my grill.

Edited July 30, 2017 by Mr DeeBeez

[Mr DeeBeez]

Had a lot of rattles coming from my door panel. Got second skin overkill pro and some damp rope and also replaced all the stripped out panel clips. Man it made such a difference. Can't hear any rattles coming from my doors any more. Listening full tilt is much more enjoyable now. Thank you second skin!

Before

 

After:

 

Edited July 30, 2017 by Mr DeeBeez