meade916 Posted November 8, 2015 Report Share Posted November 8, 2015 I feel like i am almost ready to build some REAL boxes...check out my box i designed in about 4.3 minutes and have no idea (yet) what the box volume or port area is I just wanted to see if i could take what i see on my screen (CAD) and put it to wood correctly. So far so good! More vids as i build more boxes and things! FYI to all new comers. I have THIRTY YEARS of box building (from the ground up) with everything from a god damn steak knife, to a hand held, rusty keyhole saw....to my first hammy down jig-saw (that used to shock me), to my first good jig saw then finally a (hand held) router later in life. I have built so many boxes with the worst tools, the most dangerous tools ever.....so i have paid my dues to own this CNC machine! Some people are lucky enough to have mommy or daddy buy them a CNC and start their business for them but i am 1000% self made with no help from anyone. Not even a penny. This is a real treat for someone like me who has actually paid his dues! If you have been watching my channel or been a member of this forum, you know what i am talking about. And i have 20 years under my belt before you guys even knew who i was...so in my world, this is NOT cheating haha!! thanks!! 5 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
yurvalentine Posted November 8, 2015 Report Share Posted November 8, 2015 Good shit man, should make for some very clean boxes. Quote Link to comment Share on other sites More sharing options...
DTS909 Posted November 8, 2015 Report Share Posted November 8, 2015 Maybe offer just cut pieces and buyer construct? 1 Quote VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
3vil Posted November 9, 2015 Report Share Posted November 9, 2015 Maybe offer just cut pieces and buyer construct? Ikea flat pack enclosures Quote Link to comment Share on other sites More sharing options...
KiKaZz74 Posted November 9, 2015 Report Share Posted November 9, 2015 I'd assume it only cuts at a 90° angle? I have a design for a box but I'd need the edges cut at an angle to match it all up. If you can accept files I'll get one made and sent to you for a little speaker box idea I have. I can cut the angles once I get it if it's not able to cut them. Very lucky to have this. Hope to see some bad ass projects. I like Quote My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
meade916 Posted November 22, 2015 Author Report Share Posted November 22, 2015 I'd assume it only cuts at a 90° angle? I have a design for a box but I'd need the edges cut at an angle to match it all up. If you can accept files I'll get one made and sent to you for a little speaker box idea I have. I can cut the angles once I get it if it's not able to cut them. Very lucky to have this. Hope to see some bad ass projects. I like i can do 45's with a 45 degree bit. I don't have one big enough to do 3/4" or 1" YET. That's next week. Not accepting files yet sorry. Soon though! 1 Quote All SMD products + MORE available at my store here! https://wccaraudio.com/ Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications! http://www.youtube.com/meade916 Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them http://www.instagram.com/meade916 The Official SMD Facebook fan Page https://www.facebook.com/SteveMeadeDesigns/ Follow my Tweet (Twitter) http://www.Twitter.com/meade916 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.