Jump to content

Recommended Posts

Hi Steve,

I'm having a second issue with the AMM-1 (firmware v3.8 ) regarding power measurements. Using Live/Realtime Pwr, when the frequency of my test tone exceeds 1KHz, the PF abruptly cuts in half, roughly. For example, at 1.00KHz (and below) PF=89 and at 1.1KHz (and above) PF= 50. This causes the measured power to drop by 50%, also. On the DSO I can see no change in the waveform whatsoever when changing from 1KHz to 1.1KHz (besides a tiny increase in frequency). This problem is completely independent of input power, clipping, etc. This is a serious issue for me because it's preventing me from using the AMM-1 to make meaningful measurements for the project I'm working on. Any info appreciated, thanks.

- cmichael

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 174 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...