Rockford96 Posted April 4, 2016 Report Share Posted April 4, 2016 I'm going to be ordering a 240 amp g series alt in a few weeks for my truck it's a 2001 silverado 5.3 v8 the stock belt length is 92.3" it says I will need a slightly smaller belt. I was wondering if someone could link me to the size belt I would need. Thank you Quote My setup, Digital Designs M80 3 Re audio 10's ported tuned to 36 hz Kenwood x-696 SHCA 0 gauge Polk audio coax running off hu Link to comment Share on other sites More sharing options...
Pioneerchuck Posted April 6, 2016 Report Share Posted April 6, 2016 A gates belt approximately 0.5" - 1" shorter is what you're gonna need.http://www.jegs.com/i/Gates/465/K060908/10002/-1?parentProductId= http://www.jegs.com/i/Gates/465/K060910/10002/-1?parentProductId= Quote Link to comment Share on other sites More sharing options...
ToNasty Posted April 6, 2016 Report Share Posted April 6, 2016 You should be fine with a normal length belt. There is a spring loaded tensioner on the truck. I haven't had to change the belt on mine Quote ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Rockford96 Posted April 9, 2016 Author Report Share Posted April 9, 2016 You should be fine with a normal length belt. There is a spring loaded tensioner on the truck. I haven't had to change the belt on mineyour right I just got the mechman in and I didn't have to change the belt thank you Quote My setup, Digital Designs M80 3 Re audio 10's ported tuned to 36 hz Kenwood x-696 SHCA 0 gauge Polk audio coax running off hu Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.