Jump to content

Recommended Posts

I'm not sure why I didn't think about this initially when I built the panels but I wanted to do 15's in my Tahoe but didn't want to take up any leg room. I don't have that issue with the Jeep so I'm going to build another set of panels and give them a try. Worst case, I waste $30 on material. I'm not sure how many 10's I'll try with the 15. I could fit 4 but I'll probably just end up doing 3. Threw one of my Zv3's on the panel just to see how much room a 15 would take up

498E8422-EA68-4ADD-974B-AAA7192BFC19_zps

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

WOW! 15s in the doors? I have got to see this. Just curious, what frequency are you going to cross them over at? Band pass? Tuned in.

91 C350 Centurion conversion ( Four Door One Ton Bronco)

250A Alternator (Second Alternator Coming Soon)

G65 AGM Up Front  / Two G31 AGM in Back

Pioneer 80PRS

CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage

CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill

FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon)

Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)

Link to comment
Share on other sites

They'll probably be crossed around 60hz and up to 1khz. They have good frequency response from 40-2khz in a 1 cube sealed enclosure. My panels are roughly 1 cube each so I should be good

Link to comment
Share on other sites

Love exo cage boxes..very cool. and nearly 18K on mids and highs...dizzam! Tuned in for sure!

01 Suburban Z71 - 5.3L - Black - 6" Lift on 35's - Pioneer H/U - Kicker Mids, 8" Polk sub.

Past rides-

07 Avalanche - Sunburst Orange - 4/6 Drop - Pioneer AVH-X5600 - 2/0 Royal Excelene - T/M fuse blocks - Stock and Singer 350 Alts - 4 Kinetik 1800 - Crecsendo BC5500 & S800.4 amps - 2 Tantric HDD 18's.- RE XXX 6.5 comps

01 Grand Vitara - V6 - 4x4 - Pioneer H/U - Incriminator 6.5 Comps - SSA XCON 18 - Skar 1500.1 & 84.4 amps - Singer 160 Alternator - Optima Yellow top..

Link to comment
Share on other sites

I'm not sure why I didn't think about this initially when I built the panels but I wanted to do 15's in my Tahoe but didn't want to take up any leg room. I don't have that issue with the Jeep so I'm going to build another set of panels and give them a try. Worst case, I waste $30 on material. I'm not sure how many 10's I'll try with the 15. I could fit 4 but I'll probably just end up doing 3. Threw one of my Zv3's on the panel just to see how much room a 15 would take up

498E8422-EA68-4ADD-974B-AAA7192BFC19_zps

somebody show steve this

he laughed at me when I told him ppl are running 15" midbass in their doors these days

Link to comment
Share on other sites

  • 5 weeks later...

Well this build comes to an end before I really gets good. Engine decided it didn't want to live any longer so off to the junkyard she went today. Picked up a 2004 Honda Accord for a daily and the Tahoe gets the build it should have gotten in the first place. B-pillar 4th with 6 15's and 26 10" mids

0A7D036D-B949-4268-9137-32248AFC4DA8_zps

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 350 Guests (See full list)




×
×
  • Create New...