ObTechAudio Posted August 10, 2016 Author Report Share Posted August 10, 2016 Just a massive footprint with this Taramps for the highs But we do have the battery bank on point with 15 JuiceBox Black Cherries (similar to XP3000 for those that aren't familiar) Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Now to start the box. Our goal is to shoot for around 24 cubes net tuned to around 30hz. The wheel wells are right in our way, but you'll see how we used some kerfed pieces to make the floor come together. Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Got the floor all deadened up. Foamed all the side cavities with a little deadener to seal it all off. Injected 2 whole tubes of silicone per rear window just to make sure we run into zero issues in the future. Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Ordered up tons of fiberglass supplies. Whole roll is 60 yards, but it'll be spread across three builds - the majority being this one. We started with 4 gallons of resin, but I think ended up using 6 gallons total on this project. Link to comment Share on other sites More sharing options...
Steve Barber Posted August 11, 2016 Report Share Posted August 11, 2016 Moar! Can't wait to hear this Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Moar! Can't wait to hear this We'll be down there for CES and very possible that we make it down for SOC with a few other cars. Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Working on the kerfed side pieces that'll slide right over the wheel wells. Two layers of glass for strength on the kerfs. Once the glass and second piece was laid down, we filled each kerf cut with either resin or wood glue (although I don't think we have a photo of it) Link to comment Share on other sites More sharing options...
notorious97200 Posted August 11, 2016 Report Share Posted August 11, 2016 I like that work with the kerf on the wheel wells. Tuned in for more pics. Thanks for sharing. black BMW X1 2.0 l 192 hp OEM head unit, Amplifiers : Audison AP 8.9 amp with integrated DSP and Ampere Audio 1200. Focal ES 100 K in front doors, and Dayton RS 180 for midbass under the front seats. 2 SSA DEMONS 10" subs, in a 2.6 ft3 ported box. SecondSkin Damplifier on front doors, and Luxury Liner Pro for the cargo area. Link to comment Share on other sites More sharing options...
ObTechAudio Posted August 11, 2016 Author Report Share Posted August 11, 2016 Just getting the side pieces in. Wheel wells are covered in PL 3x just for that extra hold while test fitting everything. These subs are huge, but the beginning shell of the box is making them look tiny. Link to comment Share on other sites More sharing options...
baron_of_bass Posted August 11, 2016 Report Share Posted August 11, 2016 More pics!!!! Damn this thing is sweet Team Bass-Hz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.