05accord6spd Posted August 11, 2016 Report Share Posted August 11, 2016 (edited) okay hoping some one can answer my question without simply saying the amp is garbage. So the nvx jad 1200.1..... sonic electronic has the only video dyno and it was 1100+ @2 ohms and 1300+ @1ohm. my question people are saying DD1 does not pick up any distortion with this amp. would that not mean that the smd dyno would not be able to tell what the amp truly puts out because it uses the dd1 to detect when the amp is distorting...? how did nvx even get its own RMS rating if DD1 does not work ever with this amp.. i have NEVER heard of any amp doing this. for real not looking for a return your amp or nvx is garbage. i really want to know why its the only amp i have ever seen 100% of the time not work with the dd1. Edited August 11, 2016 by 05accord6spd Quote Link to comment Share on other sites More sharing options...
RainStryke Posted August 11, 2016 Report Share Posted August 11, 2016 What is your full set up specs. How many amps have you tested with the DD1? Quote Link to comment Share on other sites More sharing options...
05accord6spd Posted August 12, 2016 Author Report Share Posted August 12, 2016 this is in response to a friend who checked it. i don't own dd1. but then when i searched for other people talking about the same thing i found more people posting the same. looking for sonic or someone to clear it up. Quote Link to comment Share on other sites More sharing options...
05accord6spd Posted August 12, 2016 Author Report Share Posted August 12, 2016 I have just never heard of this before.. Quote Link to comment Share on other sites More sharing options...
n8ball2013 Posted August 12, 2016 Report Share Posted August 12, 2016 There is zero chance that it won't register on a dd1 if done correctly 3 Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 12, 2016 Report Share Posted August 12, 2016 (edited) I havent seen this dyno on this board, but if they did a cert run, it looks for >1.0% distortion . Meaning, the dd1 software worked. Again, i havent seen this dyno test on this board. If they did a un cert run, it looks for clipping. Meaning again, the dd1 software did its job. IMHO, ...Your "people" you are "speaking with", are doing it wrong. Edited August 12, 2016 by Kyblack76 1 Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
05accord6spd Posted August 12, 2016 Author Report Share Posted August 12, 2016 This very well could be I was just wondering if I'm fact it does have a problem with dd1 it's true the dyno wouldn't be accurate? Will see what nvx has heard about this is there even us a problem Quote Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted August 12, 2016 Report Share Posted August 12, 2016 What headunit is being used? Have you measured the rca voltage? Maybe it's just so low that the gain needs to be turned up all the way, Very Doubtful but possible. Quote That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
05accord6spd Posted August 12, 2016 Author Report Share Posted August 12, 2016 Shouldn't be the problem he used a different amp and it works on set hu Quote Link to comment Share on other sites More sharing options...
AzureX Posted August 12, 2016 Report Share Posted August 12, 2016 I havent seen this dyno on this board, but if they did a cert run, it looks for >1.0% distortion . Meaning, the dd1 software worked. Again, i havent seen this dyno test on this board. If they did a un cert run, it looks for clipping. Meaning again, the dd1 software did its job. IMHO, ...Your "people" you are "speaking with", are doing it wrong. Definitely not user error. I swap out the JAD1200.1D for my old hifonics amp and follow the same procedure (instructions that came with the dd1) and it works, distortion light shows up. With the JAD the distortion light never lights up. Guess I would have to make a video of it. RCA voltage is 1.8v at max clean volume. I can get it to distort while finding the hu max clean volume through the RCAs just not after I hook into the JAD1200.1D. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.