Jump to content

New dsp dropping this month


06RTCharger

Recommended Posts

  • Replies 22
  • Created
  • Last Reply

The less stuff in the chain the better is what I think, just get the p99rs already and be done with it.

That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.

Link to comment
Share on other sites

Lol thats not the topic man. I just seen that and thought id get a topic goin here about it. Im pretty sure the site just posted it yesturday becuase it wasnt there the day before. On their main site.

I agree tho, the less processing the signal has to go thru the better. Im still weighing out my options. If that shop is open tomarrow ill be checkin out that nx706, see if its laggy.

Link to comment
Share on other sites

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Link to comment
Share on other sites

repost, sorry...

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Link to comment
Share on other sites

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

i happen to think the 3sixty.3 software is extremely easy :unknw:


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

i happen to think the 3sixty.3 software is extremely easy :unknw:

I know weve done the rounds on this before Steve. I even talked to you about it when you let us kick it at the shop at auto rama 2 years ago. (thanks again by the way,.. such a rad time, and you where a stellar host, i still feel like i got cheated on the ping pong lol) My back still hurts acting like i could pick up your SMD driver lol.

I had the RF.1 and RF.2, and quickly bought the RF.3. I loved my .2 at the time. The .3 was nothing but issues and struggles. Never connected and stayed connected faithfully.

The knob, ..the worst,.. man, it would not jump through selections reliable, ever, THEN, would go FULL tilt out of no where. Like, out of no where.

Saving programs was near impossible, i tried this cable, that cable, and 3 updates, talked to Forrest at RF for 3 weeks. Man... struggle.

Granted, again, i bought it and had it running weeks after launch. I expected some hiccups, but man,... i did NOT care for that dsp at all at the time. Im sure some updates helped. But, just my honest opinion,... i prefered the .2 by FAR. Just me. No hate. Just what i had going on, and 2 others that bought one after me, also struggled, sold them and bought others. Just the time i had with it.......just my experiance.

Link to comment
Share on other sites

Steve, anything for you it´s easy my man, you are definitely one of the best builders i´ve ever seen, but trust me, the software is not friendly at all for mortals like OP or myself :)

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Link to comment
Share on other sites

Steve, anything for you it´s easy my man, you are definitely one of the best builders i´ve ever seen, but trust me, the software is not friendly at all for mortals like OP or myself :)

im not even close to being the best. And i am not even close to being one of the smartest. It is very simple to use. As easy as any dsp. It's so easy it's almost car audio common sense for the basic features. Of course it has more powerful features than most and for that there will be a learning curve but that is normal with any brand. If you understand how to use a dsp of any type this should be simple (mostly). It definitely is not harder than a 3sixty.2.


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

I have 4 panamenian SQ champs on my team using the Audison Bit Ten, trust me, get that one, is not expensive at all and you can even keep the Stock Head unit, no need to spend a lot of money on a HU and still not getting the same result as you can get on a nice DSP, is very easy to use btw, not like the crappy 3sixty software :)

i happen to think the 3sixty.3 software is extremely easy :unknw:

I know weve done the rounds on this before Steve. I even talked to you about it when you let us kick it at the shop at auto rama 2 years ago. (thanks again by the way,.. such a rad time, and you where a stellar host, i still feel like i got cheated on the ping pong lol) My back still hurts acting like i could pick up your SMD driver lol.

I had the RF.1 and RF.2, and quickly bought the RF.3. I loved my .2 at the time. The .3 was nothing but issues and struggles. Never connected and stayed connected faithfully.

The knob, ..the worst,.. man, it would not jump through selections reliable, ever, THEN, would go FULL tilt out of no where. Like, out of no where.

Saving programs was near impossible, i tried this cable, that cable, and 3 updates, talked to Forrest at RF for 3 weeks. Man... struggle.

Granted, again, i bought it and had it running weeks after launch. I expected some hiccups, but man,... i did NOT care for that dsp at all at the time. Im sure some updates helped. But, just my honest opinion,... i prefered the .2 by FAR. Just me. No hate. Just what i had going on, and 2 others that bought one after me, also struggled, sold them and bought others. Just the time i had with it.......just my experiance.

just because you had issues with your's doesn't mean the software itself is difficult...and just because you had an issue with your's does not mean everyone has. I mean i had some hiccups in the beginning with one of them (when they first came out and i got one of the very first) Got a new one and that was that. No need to spend the next 5 years complaining about it. If it bothered you that much, and i can see it did, then don't buy the .4. I will be the first in line though. :)


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 212 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...