334 posts in this topic
Recently Browsing 0 members
No registered users viewing this page.
The plans have changed a little bit, no wall but two 12's now
The reason for making this new thread.
Old thread https://www.stevemeadedesigns.com/board/topic/205731-my-first-audio-build/
Still a lot more to deaden!
Btw i've used Silent Coat and STP ak04 premium
So the new plan(setup) will be as following:
HU: ?? don't know yet
Subs: 2 Phoenix Gold Elite.12D4
Subs Amp: Rockford Fosgate Power T2500.1
Mids and Highs: Phoenix Gold Elite.65CS Components
Mids and Highs Amp: Rockford Fosgate Power T400.2
Ground Zero GZBP 12.3500X battery under the hood
XS Power XE 12-110 battery in the back
180 Amp Alternator
OFC 0 awg power/ground/big 3
OFC 4 awg power/ground
OFC 8 awg subwoofer wire
OFC 10 awg speaker wire
Rockford Fosgate Fuses
Rockford Fosgate Fuseholders 6x
Rockford Fosgate RCA’s 10feet 2x
Rockford Fosgate PEQ remote controller
Some dual inputs
I'm now waiting on the 0awg and 10awg OFC wire to come thru the mail, then its all complete..
Box is finished just need to wrap it.
Thanks to JOE X for the box design!!
It's for 2 zv4 12's but i'm hoping it will work fine with the Elite.12's
You'll be hearing from me soon, as soon as ive done some more work
What's going on, all?
A month or so ago, I finished up one of my more fun projects for a friend/customer. Here's a build component list:
1998 Ford Expedition
Mechman 270a 12v alt
2 JS 370a 16v alts
2 K2 16v 80ah banks
8 runs Sky High 1/0 OFC (4 pos, 4 neg)
3 DC Audio 5.0 amplifiers
6 Skar Audio EVL 15s
DB Drive mids/tweets
C-pillar wall built by yours truly
This thing was an absolute blast to put together. It ended up putting up nice numbers for a c-pillar, especially with budget subs. The wall was built for 6 Level 6 15s, and there will eventually be 6 5.0s.
Pictures will be uploaded as soon as they finish uploading to photobucket! There are many, many pictures, as well as a few vids. Stay tuned!
Sealing a wall. Got 2 DC Level 6 in my Subaru and glassed out most every side. Looks sealed but on music you can feel air behind the side. Any good way or method to find the spots that need attention? Top of port glassed now too. FYI, My first wall and I am NOT a professional installer.
Things tried. Fiberglass sides and gaps. Used window seal adheisive where the glassed sided meet the b Pillar. Glassed to floor and above port
Who's Online 9 Members, 0 Anonymous, 330 Guests (See full list)