Jump to content

DC audio 5k, AA Carbon 7


Recommended Posts

I have 4 of my AA Carbon 7" speakers for sale along with my dc audio 5.0k amp.

The carbon's I'd like to sell all together for $425 shipped in the continuous US.

They are 4 ohm speakers, neo motors and are in great condition. The only drawback on them is that the rubber on the surround for the speaker has broken down on a few spots. The speakers still work but would be in need of new surrounds. I'm not sure why these 4 are like that, the other 4 I have are the same age and were used in the same vehicle prior to me owning them (I never got the chance to use them yet though myself) and they are perfectly fine. I looked online and found that you can get the rubber surrounds for 7.95 with the adhesive and everything and it's a super easy job to do. http://www.speakerworks.com/6_1_2_inch_speaker_repair_kit_rubber_p/swk65rb.htm

_CCD4020.jpg

_CCD4021.jpg

_CCD4022.jpg

_CCD4024.jpg

The DC 5k is in great condition and the only modification I did to it was to use larger screws on 2 of the 4 speaker outputs because the OEM ones I didn't like the bite they had on my 8ga power wire I used for running the power to my sub.

I am looking to sell the 5k for $750+shipping.

_CCD4025.jpg

_CCD4028.jpg

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

  • Replies 20
  • Created
  • Last Reply

pics of the terminal mod I did on the amp & legs of the amp:

20160620_193252.jpg

20160621_174928.jpg

20160621_174933.jpg

20160621_174938.jpg

20160621_174945.jpg

20160621_175002.jpg

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

I also have my SMD VU-DIN for sale. I never used it and it includes everything that you would get BNIB, 2 of the SMD decals, the owners manual and the vu-din that is still with the anti-static bag. Looking to get $90 bucks plus shipping for the vu-din.

20161022_202937.jpg

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

vu-din SOLD!! DC 5k and AA carbons still up for sale

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

BUMP!! :bump: Let's get the AA carbons and the dc5k gone!

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

On that 5k, what is the deal with the small blue wire on the positive speaker terminal?

91 C350 Centurion conversion ( Four Door One Ton Bronco)

250A Alternator (Second Alternator Coming Soon)

G65 AGM Up Front  / Two G31 AGM in Back

Pioneer 80PRS

CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage

CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill

FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon)

Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)

Link to comment
Share on other sites

That's the 12ga wire going up front to my SMD vu-din that I have installed in my truck's dashboard. I have one side of the vu-din in use for my door speaker's left channel and the other side of the vu-din is used for my sub.

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

Bump! 375 shipped for all 4 AA carbons and same price as listed above on the DC5k. That's half price of what the amp retails for!

2004 GMC Envoy1 XS power S3400 batt under the hood and 4 XS Power D3100's battery installed in the rear by the amps0 gauge power wire from front to backAlpine iva-w205 touchscreen dvd/cd/mp3/ipod/am/fm/gps headunitSundown Audio SAX-200.4 amp for my mids and highs8 gauge speaker wire from amp to woofer270 amp Mechman AltRockford Fosgate T1652-s component speakersRockford Fosgate 3Sixty.2 sound processorRca's from Rockford Fosgate and Monster Cable14 gauge speaker wire for the mids and highs1 18" Ascendant Audio SMD Dual 1 ohm with custom Black & Blue carbon fiber and hand signed dustcapBox: 5.66 cubic feet net volume box tuned to 30.13Hz with 1.5" wide wooden dowels and 1.5" thick baffle1 DC Audio 5.0k amp wired to .5 ohms nominal with an imp rise of 1.35 ohms for the single AA SMD 18"Future Vision 8000k 50w bi-xenon projector HID's with 4300k 35w fog lightsLink to my build: Buildupdates/progress

Link to comment
Share on other sites

PM sent

XS Power D5100, 2 D2700s, & 2 D975s

MechMan 220a Alt

DC 5K

Kicker 650.4

2 12 Ascendant Audio Mayhem's

Pioneer DEH-P7200HD

Rockford Fosgate 3sity.1

Build log: http://www.stevemeadedesigns.com/board/topic/166792-88-nissan-maxima-trunk-build/#entry2430899

http://www.stevemeadedesigns.com/board/topic/191439-lexus-is300-fi-crescendo-shca-rf-pics/

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 378 Guests (See full list)

    • There are no registered users currently online



×
×
  • Create New...