Jump to content

08 SILVERADO BUILD (ZAPCO/STEVENS AUDIO)


Recommended Posts

oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop :( apartment patio just don't cut it

It's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into.

I've built some cool stuff using my fixed base off my plunge rotor though with this setup.

20161217_210353.jpg

I built this for my wife with that cheapo setup.

20150207_205209.jpg

20150207_205311.jpg

Pioneer AVH480

Zapco ST5XII amplifier

Stevens Audio 6.5" components (passive)

Onyx Subwoofer

Sky High OFC wiring

Link to comment
Share on other sites

  • Replies 115
  • Created
  • Last Reply

Now that the drivers are actually in, I can clearly see the angles now. Very nice. Should sound great with minimal time alignment.

Excellent work my brother.

Yes sir, they should be just fine, and once I learn my DSP, I'm sure tuning will go smoothly, lol! I set up my Lazer and they are both top of headrest, middle of b-pillar within 1/4" inch on each side. So my cross path should be about 8 inches in front of seats dead center of truck. And with time alignment and tuning I'm hoping to have them be right smack in the middle of my dash at the window line. Also hoping for minimal to no reflection

Pioneer AVH480

Zapco ST5XII amplifier

Stevens Audio 6.5" components (passive)

Onyx Subwoofer

Sky High OFC wiring

Link to comment
Share on other sites

Hahaha! The nicest thing I ever made for anyone was a small bench for my mom one mothers day when I was in high school. Thinking back, I didn't know what a roundover bit was at the time, so the edges definitely didn't make it comfortable for sitting.

That is definitely great work. I really like the color.

Link to comment
Share on other sites

  • 2 weeks later...

Sadly not a lot of progress this week during my vacation from work. But I did get my fabrication table 90% built, started working with some ideas and ran into issues. My sub is too deep for under the seat, so I need to figure out another route. Thinking a small sealed center console is in my future, which I know I can fit my sub there.

But here are a couple pics of the fab table.

20161227_182644.jpg

20161227_182701.jpg

20161228_091457.jpg

During my trials I had a mishap with my router

20161228_233246.jpg

but didn't let that stop me, got stuff going, and started my amp rack layout.

20161230_005110.jpg

20161230_005137.jpg

Pioneer AVH480

Zapco ST5XII amplifier

Stevens Audio 6.5" components (passive)

Onyx Subwoofer

Sky High OFC wiring

Link to comment
Share on other sites

oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop :( apartment patio just don't cut it

It's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into.

I've built some cool stuff using my fixed base off my plunge rotor though with this setup.

20161217_210353.jpg

I built this for my wife with that cheapo setup.

20150207_205209.jpg

20150207_205311.jpg

Do you have build pics? Beautiful craftsmanship

Link to comment
Share on other sites

oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop :( apartment patio just don't cut it

It's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into.

I've built some cool stuff using my fixed base off my plunge rotor though with this setup.

20161217_210353.jpg

I built this for my wife with that cheapo setup.

20150207_205209.jpg

20150207_205311.jpg

Do you have build pics? Beautiful craftsmanship

Yup, I took pics start to finish!

Pioneer AVH480

Zapco ST5XII amplifier

Stevens Audio 6.5" components (passive)

Onyx Subwoofer

Sky High OFC wiring

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 361 Guests (See full list)




×
×
  • Create New...