Audio-Concepts Posted December 18, 2016 Author Report Share Posted December 18, 2016 oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop apartment patio just don't cut it It's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into. I've built some cool stuff using my fixed base off my plunge rotor though with this setup. I built this for my wife with that cheapo setup. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted December 18, 2016 Author Report Share Posted December 18, 2016 Now that the drivers are actually in, I can clearly see the angles now. Very nice. Should sound great with minimal time alignment. Excellent work my brother. Yes sir, they should be just fine, and once I learn my DSP, I'm sure tuning will go smoothly, lol! I set up my Lazer and they are both top of headrest, middle of b-pillar within 1/4" inch on each side. So my cross path should be about 8 inches in front of seats dead center of truck. And with time alignment and tuning I'm hoping to have them be right smack in the middle of my dash at the window line. Also hoping for minimal to no reflection Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
reedal Posted December 18, 2016 Report Share Posted December 18, 2016 Wow, that looks really nice. I'm sure she loves it. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Audio-Concepts Posted December 18, 2016 Author Report Share Posted December 18, 2016 Wow, that looks really nice. I'm sure she loves it.Besides our kids, best thing I made for her, lol!The top inlays I'm proud of. All pressure fit. 13 total pieces Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
reedal Posted December 18, 2016 Report Share Posted December 18, 2016 Hahaha! The nicest thing I ever made for anyone was a small bench for my mom one mothers day when I was in high school. Thinking back, I didn't know what a roundover bit was at the time, so the edges definitely didn't make it comfortable for sitting. That is definitely great work. I really like the color. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Audio-Concepts Posted December 30, 2016 Author Report Share Posted December 30, 2016 Sadly not a lot of progress this week during my vacation from work. But I did get my fabrication table 90% built, started working with some ideas and ran into issues. My sub is too deep for under the seat, so I need to figure out another route. Thinking a small sealed center console is in my future, which I know I can fit my sub there. But here are a couple pics of the fab table. During my trials I had a mishap with my router but didn't let that stop me, got stuff going, and started my amp rack layout. Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Hooah87 Posted December 30, 2016 Report Share Posted December 30, 2016 Tuned in looking good Link to comment Share on other sites More sharing options...
bsneon98 Posted December 30, 2016 Report Share Posted December 30, 2016 oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop apartment patio just don't cut it It's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into. I've built some cool stuff using my fixed base off my plunge rotor though with this setup. I built this for my wife with that cheapo setup. Do you have build pics? Beautiful craftsmanship Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
Audio-Concepts Posted December 30, 2016 Author Report Share Posted December 30, 2016 oh I'm real jealous of that, it's been on my wishlist for a little while now. I need a workshop apartment patio just don't cut itIt's been a long time coming for me. But finally pulled the trigger. I'm gonna pair it with a Porter Cable 690, and build a 4 foot x 6 foot table saw table this will go into.I've built some cool stuff using my fixed base off my plunge rotor though with this setup. I built this for my wife with that cheapo setup. Do you have build pics? Beautiful craftsmanship Yup, I took pics start to finish! Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Audio-Concepts Posted December 30, 2016 Author Report Share Posted December 30, 2016 Amp rack update.... Pioneer AVH480 Zapco ST5XII amplifier Stevens Audio 6.5" components (passive) Onyx Subwoofer Sky High OFC wiring Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.