ThreehundredC Posted January 18, 2017 Report Share Posted January 18, 2017 So just picked up a skar txl. 12. Goin in a 2008 dodge charger trunk of i could get a box plan for it. That would help Greatly. I will be running a sksr 4500 amp. have wood ready to cut Link to comment Share on other sites More sharing options...
ThreehundredC Posted January 18, 2017 Author Report Share Posted January 18, 2017 Just a basic. Slot Ported box. Please/ thanks Link to comment Share on other sites More sharing options...
reedal Posted January 18, 2017 Report Share Posted January 18, 2017 what are your max dimensions....? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Joe X Posted January 19, 2017 Report Share Posted January 19, 2017 So here is a suggestion, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 3 3/4", figure is just an assembly guide:NOTE: If building outside you need to build a cardboard dummy box to test fit in it's way inside. Enclosure Specifications: Fb = 34 Hz Vb = 3 ft^3 External Height = 14 in External Width = 34 in External Depth = 19.5 in Port Width = 3 3/4 in Cut Sheet List: * All Dimensions in Inches. * Wood Thickness is 3/4 for all Parts. External Enclosure Parts: 2 x Front & Back (3 parts) = 34 x 14 Left & Right Sides = 17 1/4 x 12 1/2 Top & Bottom = 34 x 17 1/4 L Port Internal Assembly Parts: Front to Back = 13 1/2 x 12 1/2 Extension = 9 x 12 1/2 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.