Jump to content

Xile's Suburban Build DC Audio


Recommended Posts

4 hours ago, ALDJ253 said:

Looks awesome! How's the voltage at full tilt? 

(Would love to see a vid!)

Voltage holds around 14v at full tilt. I Jack the voltage up a little over 15v before full tilt. Keep in mind my audio is separate from the car. 

Link to comment
Share on other sites

19 hours ago, xile said:

Voltage holds around 14v at full tilt. I Jack the voltage up a little over 15v before full tilt. Keep in mind my audio is separate from the car. 

Oh, I'd didn't know that. So, you have the 2 additional alts going straight back toy our batteries (after your voltage regulator)?

Link to comment
Share on other sites

4 hours ago, xile said:

The 2 mechman alts go to a xs d3400 up front then back to a bank of 7 xs d3400's. the 2 mechmans are on the AVBM2. the stock alt and battery take care of the car

Oh, that's awesome! Wish I had three money to do stuff like this. Again, looks awesome. Would love a demo vid

Link to comment
Share on other sites

  • 2 months later...

Ok guys need some advice. Got on a meter and did a 150.9db at the headrest MECA rules. My box rise is killing me. I am wired at 1 ohm nominal. Most power I got out of it was a tad over 4k watts. My subs are d2 so option are recline or different amp (s)  my thought was sell the 9k and get 2 dc 5k's then I could go .5 each. Any other input?

Link to comment
Share on other sites

On 5/1/2017 at 11:57 AM, xile said:

Ok guys need some advice. Got on a meter and did a 150.9db at the headrest MECA rules. My box rise is killing me. I am wired at 1 ohm nominal. Most power I got out of it was a tad over 4k watts. My subs are d2 so option are recline or different amp (s)  my thought was sell the 9k and get 2 dc 5k's then I could go .5 each. Any other input?

Unless u want to switch to a higher voltage setup

Link to comment
Share on other sites

On ‎5‎/‎1‎/‎2017 at 0:57 PM, xile said:

Ok guys need some advice. Got on a meter and did a 150.9db at the headrest MECA rules. My box rise is killing me. I am wired at 1 ohm nominal. Most power I got out of it was a tad over 4k watts. My subs are d2 so option are recline or different amp (s)  my thought was sell the 9k and get 2 dc 5k's then I could go .5 each. Any other input?

Love the build! I would be tempted to get another 9k and run them both at .5 ohm.

91 C350 Centurion conversion ( Four Door One Ton Bronco)

250A Alternator (Second Alternator Coming Soon)

G65 AGM Up Front  / Two G31 AGM in Back

Pioneer 80PRS

CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage

CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill

FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon)

Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 599 Guests (See full list)

×
×
  • Create New...