Kraken Posted February 7, 2017 Author Report Share Posted February 7, 2017 1 hour ago, reedal said: You may be able to use the one that makes it fit in the OE spot, or you may need to get creative and fab your own using pieces of ABS and some plastic welder epoxy. If that's the case, it'd be best to mock it up with cardboard and tape first to know what you'd need to do first, before you start cutting any ABS. instead of going through the trouble of trying to relocate your HU, why not just fab the dash to hold the tablet, but make the tablet holder have an open back so you can leave your HU in its current spot. That seems like it would be much easier to me. Now that you say that, I guess it would be nice, I just want it to be a clean setup... This is what im working with 7 hours ago, reedal said: Take a picture of your dash for us to eyeball possible locations. Also, what vehicle are you working with. You didn't mention it. Heres a pic of the same interior, not my truck though. I do have an alpine HU though in place of the factory one Alpine cde143bt/ Alpine ktp445u (4x45 amp) 2 Crescendo STS 1 (on alpine 4x45 on 2 channel mode) 4 Crescendo pwx 6.5's in front doors (Skar RP150.4) 1 Sundown zv3 12, SAE1500D. Box is 2.5 cubes tuned to 30hz. Link to comment Share on other sites More sharing options...
reedal Posted February 7, 2017 Report Share Posted February 7, 2017 Will you need to relocate your AC controls? If not, I think an opened back template to hold your tablet in front of the HU would be the easiest. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Kraken Posted February 7, 2017 Author Report Share Posted February 7, 2017 4 hours ago, reedal said: Will you need to relocate your AC controls? If not, I think an opened back template to hold your tablet in front of the HU would be the easiest. Id like to keep both if possible open. Im thinking about doing the tablet down by the cassette player instead of relocating the HU. Any thoughts on putting it there? Alpine cde143bt/ Alpine ktp445u (4x45 amp) 2 Crescendo STS 1 (on alpine 4x45 on 2 channel mode) 4 Crescendo pwx 6.5's in front doors (Skar RP150.4) 1 Sundown zv3 12, SAE1500D. Box is 2.5 cubes tuned to 30hz. Link to comment Share on other sites More sharing options...
reedal Posted February 7, 2017 Report Share Posted February 7, 2017 4 minutes ago, Kraken said: Id like to keep both if possible open. Im thinking about doing the tablet down by the cassette player instead of relocating the HU. Any thoughts on putting it there? Is your tablet bigger than the opening for your HU? If it overlaps the AC controls, you'd need to either relocate them or change location of the tablet mount. You could put the tablet mount wherever you want. You just have to be willing to do the fabrication needed to put it there. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Kraken Posted February 7, 2017 Author Report Share Posted February 7, 2017 3 minutes ago, reedal said: Is your tablet bigger than the opening for your HU? If it overlaps the AC controls, you'd need to either relocate them or change location of the tablet mount. You could put the tablet mount wherever you want. You just have to be willing to do the fabrication needed to put it there. It would fit in the same spot as the HU with about 1/4 inch cutting above it. nothing will need to change with the ac controls. If i was to put it there, i was looking on some insight as to where I could relocate the HU. If it would be real hard to mount it somewhere else, I would need somewhere different to mount the tablet. Alpine cde143bt/ Alpine ktp445u (4x45 amp) 2 Crescendo STS 1 (on alpine 4x45 on 2 channel mode) 4 Crescendo pwx 6.5's in front doors (Skar RP150.4) 1 Sundown zv3 12, SAE1500D. Box is 2.5 cubes tuned to 30hz. Link to comment Share on other sites More sharing options...
Dogla Posted February 22, 2017 Report Share Posted February 22, 2017 Just do what this guy did ? I just used my tabled in place of the head unit and connect that to an EQ to my amps (attached pics are from a Silverado and one is from my Pathfinder) Old Setup: Pioneer AVH-X5600BHS New Setup: DELL 8" tablet integrated into dashboard Soundstream TRX700D (oldskool Tarantula) Sound Storm Laboratories SQ4 Soundstream TX4.560 (oldskool Tarantula) Massive Audio NX5 4x Soundstream SST6.5 (oldskool Tarantula) 4x Polk Audio Db6501 1x Soundstream T5-12 (oldskool Tarantula) in ported enclosure 2x Skar Audio VVX-8v3 (debating dual ported or dual T-Line) (currently dual ported) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.