nkrell11 Posted May 8, 2017 Author Report Share Posted May 8, 2017 Alright did a little more today I hope these pictures might help some people in the future like me that have no clue what to do. So after doing all the wood to get as close to the door as possible I covered the door in painters tape and then put spray foam on the wood and on the door. After the foam has had sufficient time to sure I opened the door, pull hard and then peeled the tape (which was stuck more to the foam than the door). Afterwards I just trimmed it all with a sawzall blade. It gives you a really nice fit to the door and I can still open it which is a plus. I also put down my first coat of polyurethane on the inside of the enclosure tonight but I'm waiting for it to try so I can get a better picture representation tomorrow. I will probably do 2-3 coats but tomorrow I'm going out of town for work for the next 3 weeks. Oh a note about the foam the side with the completed trimmed pictures is great stuff and the application pictures are loctite. I ran out of painters tape and spray foam last night and only got one side done. I think the loctite will prove to be better quality but I will post a picture when I get it trimmed. The Loctite really expanded I could have used less than I did but I wasn't really used to it. Loctite Foam in this picture: Great Stuff: Great Stuff: Current Build: 02 Jeep Grand Cherokee Build (AKA Project Silent Night) Mechman, Neo Slow Link to comment Share on other sites More sharing options...
WalledSonic Posted May 8, 2017 Report Share Posted May 8, 2017 I like how you sealed it off without fiberglass. Very clever. Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
nkrell11 Posted May 8, 2017 Author Report Share Posted May 8, 2017 10 hours ago, WalledSonic said: I like how you sealed it off without fiberglass. Very clever. Thanks I believe I'm still going to make trim panels with wood and filler but I didn't think that would be sufficient. Plus I've never fiberglassed anything before. First coat of polyurethane on and semi dry: Current Build: 02 Jeep Grand Cherokee Build (AKA Project Silent Night) Mechman, Neo Slow Link to comment Share on other sites More sharing options...
BP1Fanatic Posted May 9, 2017 Report Share Posted May 9, 2017 Killer installation! 2000 Toyota Solara SEV6, 200 amp alternator, Jensen VX7020, Hifonics American Warrior Taurus X, Hifonics American Warrior Centurion X, JBL Club 6500C, Power Acoustik XP2K-4102, Coustic Power Logic HT-612 in a BP4. Link to comment Share on other sites More sharing options...
RedFred Posted May 13, 2017 Report Share Posted May 13, 2017 Awesome work! Any chance it'll be playing by MOB on the 20th? lol? Link to comment Share on other sites More sharing options...
nkrell11 Posted May 13, 2017 Author Report Share Posted May 13, 2017 5 hours ago, RedFred said: Awesome work! Any chance it'll be playing by MOB on the 20th? lol Unfortunately no I'm in Ohio for work until Memorial Day I'm going to be hard pressed to make Slamology. Good to see another Michigan local on here. Current Build: 02 Jeep Grand Cherokee Build (AKA Project Silent Night) Mechman, Neo Slow Link to comment Share on other sites More sharing options...
nkrell11 Posted May 14, 2017 Author Report Share Posted May 14, 2017 Well I ended up riding home with a coworker for mother's day I was home for a little under 24 hours. I did get a few small things done but nothing major to report. First off I do have to say that the Loctite Foam is worth the extra money you can tell it's much more dense. It did seem a little more messy when cutting it. Got the second coat of polyurethane down one or two more and it should be good. I don't think the pictures do it justice honestly. I got these fans in for cooling my amps they aren't exactly quiet but they do move some air, not sure if I'll set it up so both flow one way or do like a push pull kind of deal. They don't exactly match I wasn't paying attention and ordered them from two different ebay sellers, oh well. Finished the last fuse holder I should need nothing to it. Washed the Jeep and my truck both were covered in dust, pollen and saw dust. Trimmed the lower part of the B-Pillar trim to fit nailed it on the first try. Lastly pulled the door panel on the passenger side to check it out. The factory stuff to seal the door was shot so it got pulled off. I set the speakers in the panel to try and determine a layout I think this will work. It's a lot of stuff for one panel. Current Build: 02 Jeep Grand Cherokee Build (AKA Project Silent Night) Mechman, Neo Slow Link to comment Share on other sites More sharing options...
bsneon98 Posted May 15, 2017 Report Share Posted May 15, 2017 Everytime I go to home depot and see that loctite foam I wonder if its better than great stuff, just havent had a excuse to buy one yet. Glad to hear it works well! Oh and killer updates man! Looking awesome! Build Log: http://www.stevemeadedesigns.com/board/topic/152954-1998-plymouth-neon-updates/ Link to comment Share on other sites More sharing options...
Karkov Posted May 15, 2017 Report Share Posted May 15, 2017 PWX are white? Are they marine? Dat boat in the background tho! The seal coat makes it look amazing man, Love what you've done. =) Now I as well wanna try that foam, haha 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
notorious97200 Posted May 15, 2017 Report Share Posted May 15, 2017 What a job ! everything is well thought. Good. But I did not see the part where you talked about the choice of subs. Those motors were looking great, and then I saw some DSS Ethos (great subs BTW)... And 3 8K for 6 DSS : they'll have power to play ! Tuned in for more. black BMW X1 2.0 l 192 hp OEM head unit, Amplifiers : Audison AP 8.9 amp with integrated DSP and Ampere Audio 1200. Focal ES 100 K in front doors, and Dayton RS 180 for midbass under the front seats. 2 SSA DEMONS 10" subs, in a 2.6 ft3 ported box. SecondSkin Damplifier on front doors, and Luxury Liner Pro for the cargo area. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.