KiKaZz74 Posted February 8, 2017 Report Share Posted February 8, 2017 so ive been getting more and more into the tech side of things lately. well i made some changed and now have some problems that didnt happen right away. heres what i did the last few days -redid the wiring inside and moved some fans around -changed sata mode to achi instead of ide -enabled samsung rapid mode -disabled samsung rapid mode because it kept causing a bsod -modified dram timings and other small bios settings issue- today at boot it went right into a recovery loop. fixed that, somehow it changed the boot device. so i fixed that. once that loaded it crashed for smasung raper error. ok got it stable enough to disbale that and reboot. bsod aagin for memory management. reset the RAM timings to stock. finally loaded and everyhting. no LAN connection... it is giving a Ethernet cable unplugged error. cable should be good. i was playing bf1 and bf4 for a few hours last night till about 2am and this is all going on at 8am. so what could it be? i just restored bios to defualt settings and making only the smallest changes like boost speeds and achi mode and boot devices. think the lan issue could be driver? bad cable? fried port? what? i just need some help guys. this is starting to be a real pain... i wanna learn tho. system specs- mobo- asrock 970 extreme3 cpu- amd fx8350 8 core gpu- sapphire rx 480 8gb (Am i killing the performance of this having it in a 4x pcie slot?) psu- corsair ax860i cooling- corsair h80i gt ram- corsair venegence lp 16gb dual channel 1866mhz 2 x8gb boot- samsung 850 evo split to boot and storage storage 1- adata sx600 ssd 64gb storage 2- seagate 500gb hdd 7200rpm network- netgear ac1200 r6220 router, cat6 cable, isp provided modem My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
shogen Posted February 9, 2017 Report Share Posted February 9, 2017 sounds like you should actually remove items and try again... only 1 (boot) drive... then start playing with the memory chips 1 hour ago, KiKaZz74 said: so ive been getting more and more into the tech side of things lately. well i made some changed and now have some problems that didnt happen right away. heres what i did the last few days -redid the wiring inside and moved some fans around -changed sata mode to achi instead of ide -enabled samsung rapid mode -disabled samsung rapid mode because it kept causing a bsod -modified dram timings and other small bios settings issue- today at boot it went right into a recovery loop. fixed that, somehow it changed the boot device. so i fixed that. once that loaded it crashed for smasung raper error. ok got it stable enough to disbale that and reboot. bsod aagin for memory management. reset the RAM timings to stock. finally loaded and everyhting. no LAN connection... it is giving a Ethernet cable unplugged error. cable should be good. i was playing bf1 and bf4 for a few hours last night till about 2am and this is all going on at 8am. so what could it be? i just restored bios to defualt settings and making only the smallest changes like boost speeds and achi mode and boot devices. think the lan issue could be driver? bad cable? fried port? what? i just need some help guys. this is starting to be a real pain... i wanna learn tho. system specs- mobo- asrock 970 extreme3 cpu- amd fx8350 8 core gpu- sapphire rx 480 8gb (Am i killing the performance of this having it in a 4x pcie slot?) psu- corsair ax860i cooling- corsair h80i gt ram- corsair venegence lp 16gb dual channel 1866mhz 2 x8gb boot- samsung 850 evo split to boot and storage storage 1- adata sx600 ssd 64gb storage 2- seagate 500gb hdd 7200rpm network- netgear ac1200 r6220 router, cat6 cable, isp provided modem Pioneer Premier P880PRS ll Front Stage: US Acoustics 4060 - Random speakers currently ll Sub Stage: Crescendo BC3500D - 15" Xcon sealed @ 3.28 cubes ll Electrical: - Kinetik HC1800(front) NEW***DieHard P-2(rear) beaker- I know this sounds like a lot of anime bullshit, but it is true. Link to comment Share on other sites More sharing options...
KiKaZz74 Posted February 9, 2017 Author Report Share Posted February 9, 2017 the boots are all good now. its the LAN im havinbg a problem with. done everyhting but cany get a connection to establish My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
Skullz Posted February 9, 2017 Report Share Posted February 9, 2017 Tried a windows repair? 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
KiKaZz74 Posted February 9, 2017 Author Report Share Posted February 9, 2017 ill try that next. i didnt know what option was going to be best. my final idea is a restore and do everything clean since folders are so messed up and so many copies. drivers probably got deleted or corrupted somewhere but who knows where. if i do a repair which option do u think is best? just repair the problem or a rollback? My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
Skullz Posted February 9, 2017 Report Share Posted February 9, 2017 Repair as it only deals with the OS, and rollback effects everything else. 01 Ford focus ZX3 Pioneer AVH-X491BHS PPI PC 4800.2 Morel Maximo 6.5" x2 Link to comment Share on other sites More sharing options...
KiKaZz74 Posted February 10, 2017 Author Report Share Posted February 10, 2017 ended up taking it to the shop. got to the point this morning where it wouldnt boot at all. looks like a fresh install is due. i had win 10. well it wanted to only boot to win 7 and it couldnt find my drives. i took it to the shop and they told it me it was a problem child when i looked it back up. good thing diagnostics were free. thats the hard part now. ill just let them do it and save myself the headache. they had good reviews and this is a new place that isnt my normal repair shop. so i hope all works out. thanks for trying to help guys. seems like it only got worse by sitting there tho. never did get the network issue fixed. My SPL to SQ Build Log Vehicle:1997 Dodge Dakota Ext Cab 4x4 2009 Dodge Journey SXT5.2L V8 Magnum 3.5L V6 Stock AltEquipment: Headunit- Alpine CDE-147BT Mids/Highs Amp- JL Audio G6600 Class AB 6 Channel Sub Amp- Hifonics BRZ1700.1D @ 2 Ohms Taramps DSP3000.1D Sub- Hertz Hi Energy 12" HX300D SounDrive SDA3 12 Tweeters- Rockford Fosgate Power Series Silk Domes Hertz Hi-Energy Mids- Dayton Audio Reference 4" Full Range Drivers Midbass- Silver Flute 6.5" Hertz Hi-Energy 6.5" Processor- MiniDSP 2x4 RCA- 6 channels of SounDrive HF series Wire- EB Flex 2/0 -Member of Team SounDrive Link to comment Share on other sites More sharing options...
beaker Posted March 19, 2018 Report Share Posted March 19, 2018 Sooo when you switched from IDE, to AHCI you messed up BCD, which is what tells windows what to boot from. Never use system restore. In fact, disable it. Also DRAM timings are a huge bitch and almost never improve anything ever. Make sure your voltage is right and you'll be fine. Re-install windows. Make sure your SATA is in RAID mode so you can use rapidstart. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.