LoudPackRacing Posted March 16, 2017 Report Share Posted March 16, 2017 I'm having a hard time understanding exactly the purpose of an RCA distribution block. Yes I know it allows multiple amps to be installed, but if you already have a front, rear, and sub output on your radio this device it's kind of useless huh? Please correct me if I am wrong, I am just a little confused. Link to comment Share on other sites More sharing options...
bluegmcjimmy Posted March 16, 2017 Report Share Posted March 16, 2017 maybe its used if you have multi amps lets say 2-3 up front and the amps don't have line outs, i don't know, who makes it? https://www.youtube.com/channel/UCWd1ShRnPbDG9ppgJKpumdA <---- show some love to my channel Alpine MRH-F255 (old school), sub channel not used Skar audio VX35-ST tweets in front (invest in them they are worth it) kicker zr120- nice underrated amp Powerbass s1204 subwoofer in a 1.75 custom slot ported enclosure tuned to 30hz Front doors Prv 6mb200s 8ohm Alpine type-e 5.25 in dash took a shave and a hair cut.....- not in use Rear doors alpine 6.5's model/series unknown but they are loud as hell Factory alt 3.5 farad cap, does the job for now. Deck is a pioneer mixtrax 700bt model And my baby my Pioneer EQ-6500 i got for 10.00 Back-up amps- Ma Audio 598i, kicker zr120, my highly under rated JBL LC-A502 1xx watt amp... On the side- Quantum tweets not yet installed Link to comment Share on other sites More sharing options...
n8ball2013 Posted March 16, 2017 Report Share Posted March 16, 2017 It serves a purpose when you have a bunch of amps. THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 16, 2017 Report Share Posted March 16, 2017 Scot Bowman makes it. I've used 3 of them. When you run multiple amps, it's just a nice, clean, effective way to split the channel. Using one in the burban for the 6 sub amps now. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
LoudPackRacing Posted March 16, 2017 Author Report Share Posted March 16, 2017 2 hours ago, Kyblack76 said: Scot Bowman makes it. I've used 3 of them. When you run multiple amps, it's just a nice, clean, effective way to split the channel. Using one in the burban for the 6 sub amps now. Yea Scott Bowman. Do you maybe have a diagram or something similar I can look at? Where did you install it in the vehicle? Link to comment Share on other sites More sharing options...
tboorn Posted March 17, 2017 Report Share Posted March 17, 2017 you would install it wherever you had a multitude of amps that all need the same signal. Say 6 sub amps that need to all play the same input RCA but arent strapped or daisy chained, run the RCA to the back, plug it into the cockbox, boom, 6 RCA outputs Fidelity Built to Last Team Sound Asleep 24Runner Build Log: http://www.stevemeadedesigns.com/board/topic/196657-24runner-sleeper-system-lots-of-fi-neo-dd-focal-new-video-w-juicebox-lithium/ 2 x 12" Fi BTL N2 / 2 x 12" Fi BTL N3 2 DD M3b Maxwell 2.7V 3000F Supercapacitors Pioneer DEH-80prs Focal P165 V30 components Rockford Fosgate T-400.4 Link to comment Share on other sites More sharing options...
LoudPackRacing Posted March 17, 2017 Author Report Share Posted March 17, 2017 1 hour ago, tboorn said: you would install it wherever you had a multitude of amps that all need the same signal. Say 6 sub amps that need to all play the same input RCA but arent strapped or daisy chained, run the RCA to the back, plug it into the cockbox, boom, 6 RCA outputs I really appreciate your help and everyone else's. Now I have a full understanding of how this works. Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 17, 2017 Report Share Posted March 17, 2017 11 hours ago, LoudPackRacing said: Yea Scott Bowman. Do you maybe have a diagram or something similar I can look at? Where did you install it in the vehicle? Blazer build. Its a one in, 4 out. Bottom left. Second is a one in, 6 out. On the roof. Its just mounted where it works easiest, looks OK, and functions. Used them for a while and they work. Plus, i love Scott. I like supporting him, and what he does. You can just buy some 2 dollar splitters if you want. But,..... meh, i run what i run, for more than a few reasons. And, always will. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
LoudPackRacing Posted March 19, 2017 Author Report Share Posted March 19, 2017 On 3/16/2017 at 11:29 PM, Kyblack76 said: Blazer build. Its a one in, 4 out. Bottom left. Second is a one in, 6 out. On the roof. Its just mounted where it works easiest, looks OK, and functions. Used them for a while and they work. Plus, i love Scott. I like supporting him, and what he does. You can just buy some 2 dollar splitters if you want. But,..... meh, i run what i run, for more than a few reasons. And, always will. That's a nice setup there.. Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 19, 2017 Report Share Posted March 19, 2017 Thanks. The blazer has been sold for some time. We are in process of swapping amps in the burban for this season of competition. Stay tuned for that. New boards, new amp rack. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.