Jump to content
Second Skin Audio

From Torres to CAD


Recommended Posts

So I'm very unhappy with my current box. I have designed one that I think will sound much better. I am wondering if there is someone that would be able to bring my design to life. I use torres but would like a visual of how it will go together and what my port cuts should be. I don't have a CAD program that will allow me to do that. I'm open to any suggestions as well. This box will be built for an Fi Bl12 V3 on 1500w. It was suggested to me to shoot for 30sqft of port area. Thanks in advance to anyone willing to help me out.

2.47Cuft@32.03.png

AQ3500.1
15" Fi SP4
1/0 Knuconceptz Power/Ground

1/0 Sky High Big 3 Upgrade
Pioneer AVH-4200NEX
XS Power D1200 Underhood

Intimidator Gel In Trunk

CES 250A Alternator

Link to comment
Share on other sites

biggest problem i see on your design is the port lenght, there's a point where the longer it is the worst, i always try to stay at around 23" long at the most in case of an slot port like yours, i would DEFINITELY use a 6" aeroport on that design and stay at about 2.7 c/f , that should do nasty!

I´m the SPL Gains topic creator!! wanna get louder?? check this: SPL Gains. Panamenian 2009 & 2010 & 2014 Bass Race 149.9 Champion!

2 15" subs and a 2K wired at 1 ohm, http://www.stevemeadedesigns.com/board/topic/167788-fecupe2001-2-15s-on-a-2k-video-on-page-3/

8 Massive 15" subs and small power, http://www.stevemeadedesigns.com/board/topic/179296-fecupe2001s-8-15s-4th-order-bandpass-wall/

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 380 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...