Jump to content

No sound from Clarion EQS746


Recommended Posts

So I got this eq the other day, followed the directions wired up rcas from headunit(front) to the main in on the EQ. Have both rca from SAE 50.4 plugged into and my twisted sounds 1.3k. I've swapped around the RCAs, I'm getting 12v+ from the power/remote, pressed the aux button in and out...I'm starting to think this EQ will only work with a headunit with a single RCA connections? If I wire directly into the headunit to a front channel on the EQ I get sound but no control on the EQ itself. If anyone has this same EQ what's your setup like?

FW544kb.jpg

eQ4lNsb.jpg

 

 

tJ5A7Aq.jpg

 

 

 

DerZez6.jpg

Link to comment
Share on other sites

Cover the basics:

EQ turns on and lights up?

All HU controls/X-overs, etc. are set to OFF or Bypass?

HU volume is turned up enough to get a signal to the EQ?

AUX switch on front of EQ is in the correct position for the 'Main' input?

If none of the above, does it work if you use the HU RCA into the AUX input?

If the amp is a new install as well--are the gains turned all the way down and all X-overs turned off? Raise the gains a bit and see if you get any sound. Leave every other control OFF or Bypass and check the input selector switch if there is one.

Static drops are my bag.

Link to comment
Share on other sites

Id fix those power wires on the eq, thats a fire waiting to happen 

That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 1160 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...