Sharan agm Posted April 29, 2017 Author Report Share Posted April 29, 2017 10 minutes ago, YukonXL04 said: This is what they needed Or you could build a box from what jbl recommends right there in the manual 1.75 cu.ft gross with a 4" round x 10" long port. Sir I am noob in building sub box I want blueprint I will give it to woodworker and he will make and give it to me Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted April 29, 2017 Report Share Posted April 29, 2017 This is what Joe X needs. I know he is a busy guy so it might take a few days to get back to you. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Sharan agm Posted April 29, 2017 Author Report Share Posted April 29, 2017 4 minutes ago, ShadeTreeMechanic said: This is what Joe X needs. I know he is a busy guy so it might take a few days to get back to you. Ok sir I will wait thanq for your reply Link to comment Share on other sites More sharing options...
Joe X Posted April 29, 2017 Report Share Posted April 29, 2017 16 hours ago, Sharan agm said: Waiting for your reply sir Ok so here is a suggestion, power: to sub rated, amp subsonic filter to 28Hz, minimum port clearance 2 1/4", figure is just an assembly guide: NOTE: If building outside you need to build a cardboard dummy box to test fit in it's way inside. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.