ALDJ253 Posted May 16, 2017 Report Share Posted May 16, 2017 Hey guys, I am finally able to start my slow upgrade of my audio system. First and foremost is the Big 3 to get the most out of my crappy stock alternator. I drive a 2004 Acura TSX and will need to replace the battery terminals. The positive appears to have a 3 different wires coming from it all crimped into the stock terminal. If I cut the terminal off, what new terminal should I go with? Link to comment Share on other sites More sharing options...
snafu Posted May 16, 2017 Report Share Posted May 16, 2017 We have a pretty large selection of very high quality battery terminals. Here is the link: https://ceautoelectricsupply.com/individual-components/battery-terminals-boots-and-adapters/ I like the RF and JL battery terminals for these applications personally. We also sell complete Big 3 Upgrade Kits: https://ceautoelectricsupply.com/car-audio-products/big-3-upgrade-kits/ as well as Big 3 Upgrade Kits with the RF or JL terminals included: https://ceautoelectricsupply.com/charging-system-upgrade-kits/ Give us a shot. SMD members get 10% off by using Coupon code smd10 at checkout. Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
ALDJ253 Posted May 16, 2017 Author Report Share Posted May 16, 2017 4 minutes ago, snafu said: We have a pretty large selection of very high quality battery terminals. Here is the link: https://ceautoelectricsupply.com/individual-components/battery-terminals-boots-and-adapters/ I like the RF and JL battery terminals for these applications personally. We also sell complete Big 3 Upgrade Kits: https://ceautoelectricsupply.com/car-audio-products/big-3-upgrade-kits/ as well as Big 3 Upgrade Kits with the RF or JL terminals included: https://ceautoelectricsupply.com/charging-system-upgrade-kits/ Give us a shot. SMD members get 10% off by using Coupon code smd10 at checkout. The JL one, would it hold all 3 stock wires on the one eyelet adapter? I am leaning towards putting rings on the ends of all 3 stock ones. Link to comment Share on other sites More sharing options...
snafu Posted May 16, 2017 Report Share Posted May 16, 2017 2 minutes ago, ALDJ253 said: The JL one, would it hold all 3 stock wires on the one eyelet adapter? I am leaning towards putting rings on the ends of all 3 stock ones. Yes, very likely it would. You could also put all three stock wires into a single eyelet, sized accordingly. We provide ferrule ID for all of the eyelets we sell. Tony Candela - SMD Sales & Marketing Email me at [email protected] to learn about becoming an SMD Partner! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.