crownvictoria31 Posted May 25, 2017 Report Share Posted May 25, 2017 So I bought a pac TR-4 in hopes that it will solve my turn on/off thump. As per wiring this in, I believe I would wire this to the radio harness correct? Has 4 wires which is black-ground, yellow-battery. I am confiused about the green and blue. Saids to hook up the blue to 12 volt output and green to + low voltage trigger input. Would the blue be remote wire and green?? Link to comment Share on other sites More sharing options...
2loud4uboyz Posted May 25, 2017 Report Share Posted May 25, 2017 Green to deck turn on. Blue is your turn out. How your saying is wrong Link to comment Share on other sites More sharing options...
crownvictoria31 Posted May 25, 2017 Author Report Share Posted May 25, 2017 26 minutes ago, 2loud4uboyz said: Green to deck turn on. Blue is your turn out. How your saying is wrong ok beautiful. So blue would be to my amps and green goes to my radio remote.. Thank you sir. Link to comment Share on other sites More sharing options...
crownvictoria31 Posted May 25, 2017 Author Report Share Posted May 25, 2017 Hopefully This will resolve the turn on and off thump. Does any one know why this happens? Link to comment Share on other sites More sharing options...
2loud4uboyz Posted May 25, 2017 Report Share Posted May 25, 2017 Lol meant blue is your turn on out. It should help because it has a delay. Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted May 27, 2017 Report Share Posted May 27, 2017 Different manufacturers sometimes have different turn on times. One time I had a small amp that would make my big amp thump when it turned on and it drove me nuts. let us know if this helps. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
crownvictoria31 Posted May 28, 2017 Author Report Share Posted May 28, 2017 Well, this didnt help my issue. This is giving me a headach. Anyone have any ideas? Link to comment Share on other sites More sharing options...
slowfkncar Posted May 28, 2017 Report Share Posted May 28, 2017 1 hour ago, crownvictoria31 said: Well, this didnt help my issue. This is giving me a headach. Anyone have any ideas? Have you tried a 1k-1.5k resistor inline with the amps remote input? Link to comment Share on other sites More sharing options...
06RTCharger Posted May 28, 2017 Report Share Posted May 28, 2017 You could Wire up a turn on relay. CE electronics sells them. Link to comment Share on other sites More sharing options...
reedal Posted May 28, 2017 Report Share Posted May 28, 2017 4 hours ago, 06RTCharger said: You could Wire up a turn on relay. CE electronics sells them. He just did. He used PACs. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.