Jump to content

2007-2014 Tahoe/Suburban/Yukon/XL Q-logic kicks, lights and alts


Recommended Posts

So I've had some parts laying around collecting dust that I'm looking to get rid of.  All parts came out of a 2008 Chevrolet Suburban 5.3L.  Therefore all parts will fit 2007-2014 Chevrolet Suburban and Tahoe, GMC Yukon and Yukon XL.

The lights are only 9 months old and are in great condition and come with all working bulbs and have no damage.  These lights are an easy plug-and-play setup and take around 30 minutes to install all of them.  Price: $275 + shipping for the head lights and tail lights. (Mods, I apologize, somehow I boneheaded out and didn't put the paper in front of the headlights/tail lights.  If needed, let me know and I'll add).

Headlights link: https://www.amazon.com/gp/product/B0074BQF7A/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1

Tail lights: https://www.amazon.com/gp/product/B003ZYCFGA/ref=oh_aui_detailpage_o07_s01?ie=UTF8&psc=1

A5F72291-AEC5-4900-96AA-7E6A73B7065F.jpg

74D6099E-DDD1-430A-9CEF-1A93F717636A.jpg

3F9E0CDC-D379-45DD-9BCD-6CAE630F30C0.jpg

4F9F4DA9-4F66-46C9-86CE-F49FD42B4512.jpg

4F9F4DA9-4F66-46C9-86CE-F49FD42B4512.jpg

 

The kicks are well used, as you can see in the pictures.  They were trimmed to house some RF T2's so that is why they're a little nibbled on the inner ring.  However, they are 100% functionally sound.  I'm sure if you throw a coat of paint on them they'd look brand new.  Price: $75 + shipping.

Q-Logic kicks: https://www.qlogicenclosures.com/products/q-logic-q-forms-ql-k1017c

ABBF5EA0-8FC6-4067-B4E1-87DF0A930A7E.jpg

 

The alts are Singer powder coated black with red banding and boast the chrome Singer S pulley cover.  The PCM controlled is a 275a and the internally regulated are 350a.  They have not been installed since 2014 and have been getting knocked around in a corner of my garage so the powder coat is a bit worse for wear.  These alts were connected with a DC Power Inc. Quad bracket.  The bracket also has some chips but is 100% structurally sound.  I do not have the serpentine belt but I do have the bracket, the harness to trigger the 3 internally regulated alts, the idler pulleys that came with the bracket, as well as extras that I used to take up some tension in attempt to eliminate squeak.  I am looking to sell all the alts together and would offer a discount if purchased with the bracket.  Price: $800 for all four alts, $1,000 for the alts+bracket shipped.  $250 for bracket alone.  These prices reflect the physical appearance of the alts.

7AC7DD78-FFA3-4CE1-9BEB-569FF0D5CE6F.jpg

1C571036-4BD1-4F24-8C65-ACEF09DC23A8.jpg

BF09CDC0-F156-4980-B5AE-612E1C42B4FE.jpg

 

I also have a non-functioning DD M4a that I'd be looking to take offers on.  I'm more than likely just going to be sending it out for repair for future personal use but I figure I may as well get some offers.  The amp has a blown MOSFET on the output supply section and has some noticeable scratches on the exterior.  With that being said, throw an offer and if it's worthwhile I may accept.

Amp link: http://ddaudio.com/product-archive/amplifiers/m-series/m4a/

1B22A644-D78D-43F7-A638-B6FD65DEF648.jpg

265ABC52-0A31-463C-A910-AA45723A08B0.jpg

16D44414-1A89-4B42-86CA-539E91183048.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 394 Guests (See full list)

×
×
  • Create New...