tattooed6913 Posted May 31, 2017 Report Share Posted May 31, 2017 i hope this is the right area, if not please let me know. im wiring a LC7i into a 2013 ford superduty. also adding a epicenter before my amp. i have a 2013 superduty with the factory sony amp, and im trying to figure out the best way to grab the signal from the amp. is it best to use a speaker signal, a combination of speakers, or maybe just the sub signal? also, wat about running power to the lc7i and the epicenter? just grab it from the factory amp, or should i grab it from the factory aux switches located under the dash? what is going to give me the best sounds as far as what signal to grab? thanks in advance. Link to comment Share on other sites More sharing options...
Kyblack76 Posted May 31, 2017 Report Share Posted May 31, 2017 If tap in BEFORE the factory amp. Not after.. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
tattooed6913 Posted May 31, 2017 Author Report Share Posted May 31, 2017 Sorry, forgot to put this in there, I'm grabbing the signal sent to the factory amp for the LC7i and epicenter, these signals will then be sent to an after market amp. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.