Jump to content
Second Skin Audio

Four sa10d2 enclosure help needed.


Aaskia

Recommended Posts

Hello everyone, I'm new to the site, but I was wondering if I could get some assistance.  I tried playing around with winisd to create a box, but maybe I'm not going about it the correct way. 

So here is my situation.  I have four SA10-D2 that I am going to wire up to a 1 ohm load all powered by a hifonics brx4016.  I plan on installing this into my 2010 dodge challenger.  Here are the specs on the subs.  Im looking for help in designing a ported box.  1-1.25 cubic foot per sub, tuned around 35hz.  My working dimensions are 36"width, 24" depth, and 12" height.  All done with 3/4 mdf.  I have a full sheet of mdf in the bed of my truck and my wood working skills are good.  Its just designing the box that I need help with.  Thank  you in advance.

Specifications SA‐10D2  
RE (ohms) 4.29  
FS (Hz) 35.4  
Vas (L) 10.13  
Qes 0.52  
Qms 5.41  
Qts 0.48  
Le (mH) 3.41  
BL (NA) 20.40  
Mms (Grams) 230  
Cms (uM/N) 87.8  
Sens (1w/1m) 81.0  
Link to comment
Share on other sites

A little background on the rest of the system thats going in the car. 

Image dynamics cxs64 in the front active

Image dynamics 6.5 mids in the rear deck

Minidsp plus the usual other goodies

I listen to a wide range of music. Mostly metalcore, rap,  but I also play the piano,  so you might hear someYanni. 

Link to comment
Share on other sites

Based on the dimensions you gave you don't have enough space. 

You could build a sealed box to fit those dimensions, but not a ported one. 

"Nothing prevents people from knowing the truth more than the belief they already know it."
"Making bass is easy, making music is the hard part."

Builds:

U7qkMTL.jpg  LgPgE9w.jpg  Od2G3u1.jpg  xMyLoO1.jpg  9pAlXUK.jpg

Link to comment
Share on other sites

This is the dimensions of the trunk. The 40" width i cut down to 36" because of the hump at the bottom of the wheel well. My dimensions in my first post were conservative.   I can use  as much trunk as needed,  just need to make sure I have room for 3 amps. 

Screenshot_20170617-020806.png

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 270 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...