Trogdor Posted July 10, 2017 Report Share Posted July 10, 2017 I have a R.F. P600.2. For the longest time it was working just fine. Then one day it just stopped. I finally nailed the issue down to the Power Block (Power, Ground, Rem) area. If i lift up on my wires just a little bit the amp turns on with no problem. But it only lasts for a few seconds. I think that i have to re-solder the connections internally. but im not sure...any ideas? Link to comment Share on other sites More sharing options...
WalledSonic Posted July 10, 2017 Report Share Posted July 10, 2017 Pic isnt displaying. Google gave me a 403 error. Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
Trogdor Posted July 10, 2017 Author Report Share Posted July 10, 2017 Sorry about the pic not displaying....took it with my phone and sent to email then posted. Im trying to check that now. i didnt find the issue that you stated...maybe i was looking in the wrong place Link to comment Share on other sites More sharing options...
slowfkncar Posted July 10, 2017 Report Share Posted July 10, 2017 It does kinda sound like a loose input terminal on the board, open it up and check? Some of the older chrome plated RF amps had thin boards, atleast the lower models did. Link to comment Share on other sites More sharing options...
Trogdor Posted July 10, 2017 Author Report Share Posted July 10, 2017 Thanks. I will check that....is there a way to reinforce the terminal inputs? Link to comment Share on other sites More sharing options...
slowfkncar Posted July 10, 2017 Report Share Posted July 10, 2017 1 hour ago, Trogdor said: Thanks. I will check that....is there a way to reinforce the terminal inputs? No, not that i know of. you can just clean the area with denatured alcohol before & after, i use 60/40 2mm rosin core solder on all my big connections. Link to comment Share on other sites More sharing options...
Trogdor Posted July 10, 2017 Author Report Share Posted July 10, 2017 Thanks for that....I will try it Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.