Jump to content

Dodge Nitro built for commutes


Recommended Posts

So its a 2011 Heat with 4.0L V6

Here's the headunit a DDX9903Sddx9903S.jpg.4afece374ad32d75c949487a13c778fe.jpg

 

So i put it in with butt connectors at first but had a lose one 20170918_135431.jpg.fb46115233e4949f8b215f1cca8ab7b8.jpg

 

SO i did a solder and tesa tape wire2.jpg.c77a49c77c661b35215a96038e0e7cdc.jpg

Link to comment
Share on other sites

It had a factory Infinity sub woofer but I wanted more bass so tried putting the a shallow mount Pioneer 8"

20161227_200845.jpg.bfbf90d0a8e972f1bbb7f1f0af368645.jpg20170412_145002_Film1.jpg.7b21809fda141dfd1739e4db195437ce.jpg

Turns out that factory amp is like 16-OHM  And only 23 watts,  So i got an amp.

Link to comment
Share on other sites

Pick up a unused Scosche EFX 300c4 for cheap from a buddy.  20170412_153546_Film1.jpg.a758b35875d41cb070b3a2000b8da6fa.jpg

 

Got it installed, and almost directly blew out that Pioneer 8"(turns out they're not that well made),  And upgraded it to a 8" Rockford Fosgate P3.  

rockford.jpg.bc75ae3a7cb472d82f13787931063d45.jpg Which was being choked by the factory location enclosure so i put it in a sealed box.

And so then...

59c7c5d7f03e9_10s.jpg.4cf9f3b96d6b77e1655bdf0fd17a339c.jpg

I figured if i have to have a box taking up space I might as well put in some 10" Kickers in a ported box.  Now I'm not much of a carpenter so I got a Sound Ordnance box.

 

Stay tuned to see the sloppy wiring I did for the back up camera.

Link to comment
Share on other sites

  • 3 weeks later...

Here's how i ran the wires for the back up camera add on,  yes both pos and neg are red. 20161227_200824.jpg.b6a35469fcba3be303a8e06abb6aa422.jpg20170412_145002_Film1.jpg.fb7e43a9dfb2f85202c9c96a71ac6391.jpgTrying to use the factory spot with an aftermarket sub.

20170918_135431.jpg.b3d9ada1fbbe58b01c14de4030d91a5d.jpg Orginally used crimps for the wire install

20170925_103234.jpg.b691a3066a8c7cc206c2341767fded8f.jpgZip tied up the fuse holder.

20170302_162727_HDR.jpg.4b9466704458b54f9eb1b3f79b7f8052.jpgAnd hauled some mattresses 

20170412_144253_Film1.jpg

Link to comment
Share on other sites

  • 4 weeks later...

I did 4 Rockford P2 10s ported in a older nitro with the grey plastic everywhere. On a Rockford T1500. Man that was an awesome setup. 

How are you liking the subs aimed to the front? Never worked well for me in an sub

18 Sierra 6.2 Z71 : 3 F8L's, DD M2a @.67, 1.95@33

05 TL build log SOLD

04 YukonXL : jvc kw-v51bt , RE 6.5c, 4 jbl gt5 12s, Memphis pr1000.1 5.5 cu.ft. sealed

Link to comment
Share on other sites

  • 1 month later...
On 11/2/2017 at 7:25 PM, YukonXL04 said:

I did 4 Rockford P2 10s ported in a older nitro with the grey plastic everywhere. On a Rockford T1500. Man that was an awesome setup. 

How are you liking the subs aimed to the front? Never worked well for me in an sub

I turned them around to today, and they sound a lot better then they did even at lower volume.  I was worried about damaging the cone so i had them up against the seat.  I'm stoked you said something. 

Link to comment
Share on other sites

If your worried about damage, just buy the kicker grills for them. Also I highly recommend a new box. Those prefab ported boxes are horrible compared to a proper designed and built box.

18 Sierra 6.2 Z71 : 3 F8L's, DD M2a @.67, 1.95@33

05 TL build log SOLD

04 YukonXL : jvc kw-v51bt , RE 6.5c, 4 jbl gt5 12s, Memphis pr1000.1 5.5 cu.ft. sealed

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 418 Guests (See full list)

×
×
  • Create New...