Jump to content
Sundown Audio

Recommended Posts

No!

I am not understanding what you mean by "pushing Jacob".

TeamSundown-3.jpgTeamNemesislogo.jpg

If you build it, db's will come...

NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09).

Competition Only Record Holder Trunk 0-500 watts---148.1

2006 Nissan Altima 3.5 SE

Currently Rebuilding....

My 150db Plus Trunk Build

I do box designs.

[benH] 6:24 pm: clipping doesn't really hurt subs

[benH] 6:24 pm: being an idiot is what blows subs

Link to comment
Share on other sites

I am not understanding what you mean by "pushing Jacob".

Maybe I didn't use the propper wording and I apologize.

Sorry

Maybe I should have said pushing the subject of the 200 amp fuse rating on the SAZ-3000D for NSPL comps.

And maybe I shouldn't have said anything at all.

I apologize.

Gotta eat dinner, Be back

Edited by ISO

Isobaric - Refers to the practice of coupling two drivers together to make them act as one.

"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."

Insanity: doing the same thing over and over again and expecting different results.

The Destruction of a person builds character.

 

Terryswork001.png

Link to comment
Share on other sites

IMO... it's dishonest. Whether Fred would allow it or not is not the question, I don't think it's right.

I can totally respect that. Its cool being the underdog anyways. I doubt i'll be setting any nspl world records but I'll sure as hell give them a good run with half the power and subs.

teamnemesissundown-1.jpg

Link to comment
Share on other sites

I can totally respect that. Its cool being the underdog anyways. I doubt i'll be setting any nspl world records but I'll sure as hell give them a good run with half the power and subs.

Have you given any thought to 4 subs?

TeamSundown-3.jpgTeamNemesislogo.jpg

If you build it, db's will come...

NSPL World Record Holder Trunk 0-1800 watts---147.9 with 1722 clamped watts @ 40Hz(9-20-09).

Competition Only Record Holder Trunk 0-500 watts---148.1

2006 Nissan Altima 3.5 SE

Currently Rebuilding....

My 150db Plus Trunk Build

I do box designs.

[benH] 6:24 pm: clipping doesn't really hurt subs

[benH] 6:24 pm: being an idiot is what blows subs

Link to comment
Share on other sites

I wanted to put this thread back on topic.

I had a chance to hear the prototype version of the SAE-1200D for about 30 to 45 minutes on 3 15 inch Nightshade 15 inch SPL subwoofers at 1.3 ohms.

Near the end of page one is my opinion.

http://www.stevemeadedesigns.com/board/ind...showtopic=19751

Its an impressive piece of equipment.

I don't feel there is anything major to worry about with the transition from the Saz-1500D to the SAE-1200D except on paper and paper don't mean shit.

The SAE-1200D should satisfy most consumers needs.

Isobaric - Refers to the practice of coupling two drivers together to make them act as one.

"Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go."

Insanity: doing the same thing over and over again and expecting different results.

The Destruction of a person builds character.

 

Terryswork001.png

Link to comment
Share on other sites

YIPPY!

Prices set yet?

X10

You said the 2000d was test at 2900 watts @ .5 what is the specs @ 1 & 2 ohms

Edited by carolinacartel

1993 Mazda Mx-3

Subs: 2 18" DC Audio Lvl 4 D.7

Highs amp: Sundown SAX-100.4

Sub amp: Sundown SAZ-3000D

Electrical:Kinetik 1200 under hood, 2-Kinetik 2400 rear

All 1/0 KnuKonceptz Wire Power/Ground, Big 3, 8Ga Speaker Wire, KnuKonceptz Karma RCA's

Dampening: 120sqft 80Mil Thick Sound Destroyer Mat

Goal: 150 DB 149.9 Street Bass

TeamSundown-3-1.jpg

DCSig.jpg

Link to comment
Share on other sites

X10

You said the 2000d was test at 2900 watts @ .5 what is the specs @ 1 & 2 ohms

1/2 nominal with a rise to the 1s impedance wise.

Rated power is 2000 watts @ 1 ohm, 1000 watts @ 2 ohms, and 500 watts @ 4 ohms.

- Jacob Fuller

- Owner, Sundown Audio

- Sundown Audio on FACEBOOK

- Please DO NOT PM ME -- use my email address -- [email protected]

Banner_468x60.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 714 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...