BMS Posted November 9, 2017 Report Share Posted November 9, 2017 Not really a bass knob think its a gain knob anyway i lost if for my opti900x2 and can't seem to find a replacement so can i just buy any knob that uses the same connector or will that not work. Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted November 9, 2017 Report Share Posted November 9, 2017 I think the Lanzar amps are made in China and are a completely different design from the Korean boards that are in just about every other amp. That being said, it still might work. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
WalledSonic Posted November 9, 2017 Report Share Posted November 9, 2017 Some of the korean knobs are flipped 8 wire, some straight 8, and at least 1 chinese board i saw was 4 wire. You'll just have to check around OP. Chevy Sonic Wall (4) 15's on 10k Build Log https://www.stevemeadedesigns.com/board/topic/209412-2015-chevy-sonicwall4-15s10klithiumlarge-case-hairpin-us-alts/ (4) Fi SP4 15's | (2) Ampere 5Ks | Active! | Arc KS600.2 & KS125.2mini | CDT Silk Domes | Silver Flute 8s | 240Ah JY | US Alts Jeep Wrangler JK (4) 8's in a 4th Order Build Log https://www.stevemeadedesigns.com/board/topic/209841-shadow-2016-jeep-wrangler-jk4th-order4-8sdc-35klarge-case-hairpin-us-alts/ IG @walledsonic Link to comment Share on other sites More sharing options...
BMS Posted November 9, 2017 Author Report Share Posted November 9, 2017 yeah I see now it has 4 pins most are 6 from what ive seen finding a 4 seems more difficult. Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted November 9, 2017 Report Share Posted November 9, 2017 Most people run a Pac LC-1 on the RCA lines. https://www.amazon.com/PAC-LC-1-Remote-Amplifier-Controller/dp/B0002J226O 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.