Triticum Agricolam Posted January 21, 2018 Report Share Posted January 21, 2018 Looks good to me! "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
sTp Posted January 21, 2018 Report Share Posted January 21, 2018 If trit says it's good then it's good. Give me ten and i can give you a cutting list. Link to comment Share on other sites More sharing options...
gonzalez210 Posted January 23, 2018 Author Report Share Posted January 23, 2018 You guys are awesome! Thank you! Does the sub have to be all the way to left like in that rendering or can it be right in the middle? Link to comment Share on other sites More sharing options...
gonzalez210 Posted January 23, 2018 Author Report Share Posted January 23, 2018 Hey sTp, for the bracing, is that measurement for the long side or the short side? As in do I cut a 4 13/16 x 15.5 piece and then cut the 45 degree angle off that measurement? Link to comment Share on other sites More sharing options...
sTp Posted January 23, 2018 Report Share Posted January 23, 2018 Sub position shouldn't be a problem and for the 45's they are all the long sides so do as you cut the long bit and then use 45 degree bit in the router to get your angle. Also because the box is two baffles you could flush mount the sub also if you wanted to. And last thing would like to see some pictures if possible when it's built and also let me know what it play's like. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.