Papaslim Posted February 2, 2018 Report Share Posted February 2, 2018 Hey guys and gals I have 3 vvx10s on a Hifonics BRZ2400. I was thinking of getting 2 EVL 15s with a RP3500. Unfortunately it seems i dont have the 7 cubes needed for the EVLs. What do you all think of the vvs on the RP 3500? Note: 10s are D 2s Getting loud is only half the job;sounding good while doing it is where the glory is.1998 Jeep CherokeeHead Unit: Pioneer AVH-P6300BTFront Stage: Kenwood 6.5Rear Stage: kenwood 6.5Tweeters: SoundstreamMids/Highs amp: Hifonics Zeus 600.4Sub Amp: Hifonics BRZ2400Subs: 4 Skar VVX 10s(only running 2 now; still has all of them though)Batteries: Optima Red Top(under the hood)XS Power D1200(in the trunk)0 AWG Power Wire Link to comment Share on other sites More sharing options...
skaraudio Posted March 22, 2018 Report Share Posted March 22, 2018 On 2/2/2018 at 5:28 PM, Papaslim said: Hey guys and gals I have 3 vvx10s on a Hifonics BRZ2400. I was thinking of getting 2 EVL 15s with a RP3500. Unfortunately it seems i dont have the 7 cubes needed for the EVLs. What do you all think of the vvs on the RP 3500? Note: 10s are D 2s Hi Papaslim, Thanks for the question! I would stick with the VVX-10v3's and when you are ready; I'd recommend the upgrade to the RP-3500.1D on the existing subwoofer setup. Having proper space for the (3) 10's and increasing the power (which they can handle!), you will notice the results better than potentially choking (2) EVL-15's with improper air space. Please feel free to drop back in and let us know how the build is going, thanks for running Skar Audio! -Kevin S. Skar Audio www.SkarAudio.comPhone : (888) 501-7527 Link to comment Share on other sites More sharing options...
Recommended Posts