lightfoot Posted February 24, 2018 Report Share Posted February 24, 2018 I have a RE audio xxx 12 that I am looking for vented enclosure recomendations. On their site, they recomend 2.2 ft with a port of only 12sq." . In my opinion, both the enclosure and port are to small, especially the port. Anyone have any recomendations, or real world experiance with this sub? Max external dimensions are 37 X 15.5 X 20. Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted February 24, 2018 Report Share Posted February 24, 2018 How much power are you running? "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
lightfoot Posted February 24, 2018 Author Report Share Posted February 24, 2018 sundown saz 2500 Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted February 24, 2018 Report Share Posted February 24, 2018 From what I could find, RE was recommending 2.2 - 2.7 cu ft per sub. I think those numbers are very reasonable and if anything, I'd go smaller. The 12 sq in of port area RE recommends is way, WAY low though. On the amount of power you are going to be running you are going to want as much port area as you can get, no less than 20 sq in per cube. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
lightfoot Posted February 24, 2018 Author Report Share Posted February 24, 2018 thanks for the advice Link to comment Share on other sites More sharing options...
lightfoot Posted August 24, 2018 Author Report Share Posted August 24, 2018 ended up doing 3 cubes with a 6" areo tuned to 32hz. forward firing sealed off. car is an 05 Nissan Altima Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.