reedal Posted March 20, 2018 Report Share Posted March 20, 2018 2 hours ago, dyablo409 said: I feel like yall are getting the wrong signal. I did not create this thread to see if i could get a hand out of any sort. I just thought I was doing somthing wrong and wanted others opinions and or different ways of testing to see if it worked or not. I don't see where anyone said anything about you getting a handout. Send tony an email with the issue you're having, and I'm sure he'll help you figure out or fix the issue for next to nothing, rather than make you purchase a new tool. [email protected] can't really go wrong asking the engineer behind the product to help fix it. Quote SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
audiofanaticz Posted March 20, 2018 Report Share Posted March 20, 2018 No one is saying you are asking for something for free, I am just assuring you go through the steps to guarantee it is something with the meter and not that one specific install/gear because if you send it out to be repaired it may take a few weeks until you get it back. It would be even worse to send in a perfectly working meter be without it for a while only to get it back finally and you realize something else was the issue. Just am trying to narrow down the possible issue as much as possible and troubleshoot. I know first hand the mass majority of hi/low converters will show distortion on the dd-1 as soon as you turn the volume up 1 notch, sometimes the volume can be all the way at 0 and the majority of those converters are showing distortion. I actually made a video thats like 17 minutes long testing a few different converters and a prototype SMD converter that never made it to market so I removed the video from youtube. You can email Tony at: [email protected] You can email Juan at: [email protected] I would probably email both because one may respond faster than the other with warranty instructions. Quote Link to comment Share on other sites More sharing options...
dyablo409 Posted March 20, 2018 Author Report Share Posted March 20, 2018 3 hours ago, audiofanaticz said: No one is saying you are asking for something for free, I am just assuring you go through the steps to guarantee it is something with the meter and not that one specific install/gear because if you send it out to be repaired it may take a few weeks until you get it back. I know first hand the mass majority of hi/low converters will show distortion on the dd-1 as soon as you turn the volume up 1 notch, sometimes the volume can be all the way at 0 and the majority of those converters are showing distortion. I actually made a video thats like 17 minutes long testing a few different converters and a prototype SMD converter that never made it to market so I removed the video from youtube. You can email Tony at: [email protected] You can email Juan at: [email protected] I would probably email both because one may respond faster than the other with warranty instructions. Thanks that's exactly what I wanted to do. I wanted to make damn sure it was not user error. I'll email them and see what they say. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.