Deven94 Posted November 2, 2018 Report Share Posted November 2, 2018 Hello fellow bassheads , i was wondering if anyone could help me with a design for my 2001 crown vic. I wanted to do 2 orion hcca 15’s d2 wired to 1 ohm on a skar 4500. I would like the port to be tuned to around 32hz. I have a p71 crown vic with the deep box trunk ... any help/ideas/advice would be much appreciated ! Thanks p.s. to the Legendary JoeX ... it would be an honor if you stepped in sir. I have built a few of your boxes from the posts and they alway’s hit hard. Thanks Link to comment Share on other sites More sharing options...
CstrokerV Posted November 2, 2018 Report Share Posted November 2, 2018 Can’t run one ohm if you have 2 d2s my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
blarg456 Posted November 2, 2018 Report Share Posted November 2, 2018 You gonna have to run two separate amps and gain match if you want those d2's at 1 ohm. You need 2 dual 4 ohms if you wanna do 1 ohm with 1 amp. Link to comment Share on other sites More sharing options...
Deven94 Posted November 2, 2018 Author Report Share Posted November 2, 2018 Sorry that was a typo. Lol 1 amp running it down at 1 ohm with 2 d4’s. Link to comment Share on other sites More sharing options...
Kyblack76 Posted November 2, 2018 Report Share Posted November 2, 2018 I'd imagine, first thing Joe, or any designer will want is DIMs. Give them at least that so they know. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Deven94 Posted November 15, 2018 Author Report Share Posted November 15, 2018 So the usuable dimensions are : Width 43 Depth 26 Height 24 Any help would be great. I was think subs facing up with port firing to rear of trunk. But if anyone knows of any sick bandpass designs that would be super awesome. Thanks Once Again , Deven Link to comment Share on other sites More sharing options...
DiBo Posted November 16, 2018 Report Share Posted November 16, 2018 23.5x42x23.5 (1" MDF) subs up Port back. With 2” dowel bracing vertically x1 and front to back x1 and 2.75" 45° in corners and 4.25in 45° in Port. Port 21.5x5.5x26 118in sq port area Vb 8ft³ FS 32.49 +/- Link to comment Share on other sites More sharing options...
Deven94 Posted November 17, 2018 Author Report Share Posted November 17, 2018 Question Link to comment Share on other sites More sharing options...
Deven94 Posted November 17, 2018 Author Report Share Posted November 17, 2018 Sorry for the duplicate message , i was wondering would i need the dowels if i did a double baffle up top? Or what about 1.5 walls all the way around for rigidity? I was gonna use 3/4 sanded birch ply .. also i dont understand what u mean by port 45 Link to comment Share on other sites More sharing options...
DiBo Posted November 18, 2018 Report Share Posted November 18, 2018 6 hours ago, Deven94 said: Sorry for the duplicate message , i was wondering would i need the dowels if i did a double baffle up top? Or what about 1.5 walls all the way around for rigidity? I was gonna use 3/4 sanded birch ply .. also i dont understand what u mean by port 45 If you want 1.5" birch I can redesign. Not necessary to overbuild it that much in my experience. It's just 2-15's on 4-5k before rise... You can't wire 2 dual 2 ohm woofers to 1 ohm. You'll be @.5 or 2 ohms. I'll post pic of port 45° Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.