Jump to content

Budget 0 gauge power wire?


Recommended Posts

I actually have a hexagonal crimp.tool but max is 4gauge, was looking at the hydraulic ones, probably gonna grab one,a but load if lugs, and some.new cab wire and redo everything,  hopefully for the last time!

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

So just went to order some cab 0 and all was good until they wanted $30 more dollars to ship it. Found some rockville awg cca 0 for $60 ND free shipping, what do yall think? There are spools of American bass and stinger 0 awg cca for $70 also. Model.is R0G50BLUE and it's $59.99 free shipping 

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Ended up just getting the skyhigh 1/0 oversized,  didn't want to chance it cause I cant afford to buy it again for a while and need to focus on new batteries and then a sub upgrade.  Hopefully I don't run into any issues with the 1/0 wire lugs I bought. May have to sacrifice a few strands to make em fit but I'll worry about that when I get everything I guess. Thank you guys for the advice and help, this site is great about helping ppl out!

Screenshot_2018-12-29-09-11-19.png

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Well I am the only.welding shop in a 100 mile radius,  and we aren't ready to upgrade leads yet or that would have been the ideal option,  hopefully this skyhigh 1/0 will work out well for me. 

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

23 hours ago, ehall8702 said:

Well I am the only.welding shop in a 100 mile radius,  and we aren't ready to upgrade leads yet or that would have been the ideal option,  hopefully this skyhigh 1/0 will work out well for me. 

yeah probably not too many welding shops in a town with barely 1000 people lol!  but hey, that's less competition for you! 

and you'll be more than happy with the sky high stuff (great price too btw).  once you have it all lugged, crimped, and installed properly you can officially cast aside all your cable issues for the time being.  one thing off the "worry about" list!

 

Link to comment
Share on other sites

That's reassuring to hear, kinda skeptical and been nagging in the back of my brain that maybe I made a mistake, glad to hear I didn't. Started measuring and I'll have enough to double run everything except my amps for now. Thanks again for the reassurance! 

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

  • 2 weeks later...

Got all my wire, lugs, wire holders( awesome will put a pic in post),  and my firewall grommets to come back through floor at rear if Blazer. Now I need like 3 or 4 hours on the lift at work to get it all done. My only worries now are will all the terminals fit on my battery or not! I'm gonna double run everything including big 3/4 too and dedicated frame grounds as well as chassis grounds.

Screenshot_2019-01-08-19-01-59.png

2009 Silverado 1500, 7.5" lift, 37x12.50r17s, Built Gen 4 5.3L ( 4.8l flat pistons, decked 243s, SS2 Cam, Pac 1218 springs, ported intake, 120mm TB, Long tubes, 3" duals HP tuner software tuned by me), 4l80e swapped and 4.56 gears. All done by me. stereo is Pioneer avh 600ex, all stinger rca, jp23 v1.5, skar rp150.4, and hertz hpd4. 2 SHCA 6.5 8ohm, 1 SHCA 3.5", and 1 DS18 tw120pro in each door. The 3.5 mid and 3.5" tweeters are powered by the skar rp150.4, the 6.5s are powered by the hertz bridged @4 ohms. Dual runs   of 3/0 welding cable, 300a alternator, 2 Vmax AGMs up front. current sub is a AB XR 12 ( dual 2 ohm) with bottom spider cut out in 2.25 cubes at 32hz

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   1 Member, 0 Anonymous, 310 Guests (See full list)

×
×
  • Create New...