DiBo Posted January 20, 2019 Report Share Posted January 20, 2019 Going with bolts, washers and nuts on this enclosure. 4 subs and I want options at the terminals. 4 nuts and bolts so I can wire to .5 or 2-1ohm configurations. Hardware comes grade 8, zinc coated, etc. What should I get? Link to comment Share on other sites More sharing options...
thefatkid Posted January 20, 2019 Report Share Posted January 20, 2019 ive grounded with grade 8 before but never for speaker wires. id think any would be conductive. Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted January 20, 2019 Report Share Posted January 20, 2019 Get something made out of aluminum, or copper if you can find it. The conductivity of steel sucks. That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
Ron36 Posted January 20, 2019 Report Share Posted January 20, 2019 Make sure U use lock washers 2022 Ford Maverick on 22’s Skar SK1500.1 on 4 Skar VD-8’s Mids Sundown Super tweeters, Skar TX 6.5 components on Skar SKM400.4 LC2 for audio control , XS Power D680 XS Series Extra Battery Link to comment Share on other sites More sharing options...
DiBo Posted January 21, 2019 Author Report Share Posted January 21, 2019 17 hours ago, Ron36 said: Make sure U use lock washers Yeah I got 5/16 bolts and lock washers, fender washers, and nuts. I just went with the regular zinc shit at home steepo. I'm going to hunt down some better material bolts tho. I heard stainless sucks. Link to comment Share on other sites More sharing options...
mbdblue Posted January 23, 2019 Report Share Posted January 23, 2019 Ive used these before with success...https://www.parts-express.com/dayton-audio-bpa-38sn-hd-binding-post-pair-satin-nickel--091-1247 just another option AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
DiBo Posted January 23, 2019 Author Report Share Posted January 23, 2019 12 hours ago, mbdblue said: Ive used these before with success...https://www.parts-express.com/dayton-audio-bpa-38sn-hd-binding-post-pair-satin-nickel--091-1247 just another option Those look pretty good. It was hard to get an idea of how big they were until I looked at the picture of that black enclosure with a pair of these attached. I just don't think these would be long enough not only do I have 2 woofers attached to each positive in each negative, I have to run jumper wires on the outside. Maybe I should just make some small bus bars instead that'd be pretty dope. Thanks for the link though I have a small home audio project coming up soon and these would be perfect. These would also be good for single sub setups or setups where I have just one pair. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.