LoudPackRacing Posted February 14, 2019 Report Share Posted February 14, 2019 I’m going to be replacing my Image Dynamics IDQ12 sealed with 2 Sundown SA-8s ported.They will be going in my 1980 firebird. I am undecided on amps at the moment, stuck between the Zapco st-1350xm , Creacendo Symphony S1 , or the Skar SKv2 1500.1.im running all Sky High 1/0 gauge with a Duralast 78-DL and Alpine 172-BT. Max deminsions are W 34”, H 10”, L 12” Link to comment Share on other sites More sharing options...
LoudPackRacing Posted February 16, 2019 Author Report Share Posted February 16, 2019 Anyone? Link to comment Share on other sites More sharing options...
bmwking Posted February 16, 2019 Report Share Posted February 16, 2019 rated power to subs, 35hz tune (roughly) Link to comment Share on other sites More sharing options...
LoudPackRacing Posted February 18, 2019 Author Report Share Posted February 18, 2019 On 2/16/2019 at 8:41 AM, bmwking said: rated power to subs, 35hz tune (roughly) That design looks very nice.. about how many cubs per sub is this and what tuning? Link to comment Share on other sites More sharing options...
shredder2 Posted February 18, 2019 Report Share Posted February 18, 2019 Looks like the Sundown Sketchup design to me Op If it is it's linked on their site. Id wager its close to their recommendations. That space available you supplied seems smallish to me at a glance, you might end-up using closer to minimum airspace even with a round port. A slot uses more volume and those measurements seem small to me I'd try to find more space if using a slot... of course it's gotta fit thru the opening so even tho the space is available I'd make sure it'll go in there Link to comment Share on other sites More sharing options...
LoudPackRacing Posted February 18, 2019 Author Report Share Posted February 18, 2019 5 hours ago, shredder2 said: Looks like the Sundown Sketchup design to me Op If it is it's linked on their site. Id wager its close to their recommendations. That space available you supplied seems smallish to me at a glance, you might end-up using closer to minimum airspace even with a round port. A slot uses more volume and those measurements seem small to me I'd try to find more space if using a slot... of course it's gotta fit thru the opening so even tho the space is available I'd make sure it'll go in there That’s also why I listed those specs due to the opening of the trunk. Is it possible you can design one with aero ports instead? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.