Jump to content
Second Skin Audio

Hds3.1 12 box help


Grvndson

Recommended Posts

Try explicit audio app or Torres calculator to get an idea about where you need to be. A single 6" is more area than 2 4". You'll probably be best off with a single 6" or dual 4"

Kinda limits area when using an aero at times cause its a fixed area. 

Usually to do it correctly you'll need to model it on your power to determine port area needed.

Link to comment
Share on other sites

12 hours ago, shredder2 said:

Try explicit audio app or Torres calculator to get an idea about where you need to be. A single 6" is more area than 2 4". You'll probably be best off with a single 6" or dual 4"

Kinda limits area when using an aero at times cause its a fixed area. 

Usually to do it correctly you'll need to model it on your power to determine port area needed.

Ok, thank you 

Link to comment
Share on other sites

Try Soundqubed's site

1 hour ago, k58.cross said:

Do you have the sub's ts parameters? I couldn't find a manual in Google. Need those to properly model a box.

I think I found it on Speaker-box lite's site as well as SSA site... probably others too I think I found them fairly quickly when I looked 

Been awhile tho... idk 

Yep.. they're there... just checked

I'd go with a single 6" Aero at 25" long in 2.5ft3 net if that volume is solid

Or.... 2 4" Aeros at 23" in the same volume

But the single 6" would be my 1st choice

Link to comment
Share on other sites

On 2/20/2019 at 2:31 PM, shredder2 said:

Try Soundqubed's site

I think I found it on Speaker-box lite's site as well as SSA site... probably others too I think I found them fairly quickly when I looked 

Been awhile tho... idk 

Yep.. they're there... just checked

I'd go with a single 6" Aero at 25" long in 2.5ft3 net if that volume is solid

Or.... 2 4" Aeros at 23" in the same volume

But the single 6" would be my 1st choice

Thank y’all , sorry for not replying. I’ve been busy with work. But one last question. Should I do the port firing from the side, or out the front of the box. If I was to do the 1 6” at 25” long wouldn’t that mean the port would stick 6” out of the box giving that it’s 6” from the back wall? 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 273 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...