Kris4b11 Posted February 21, 2019 Author Report Share Posted February 21, 2019 11 hours ago, Joshdashef said: Gotta say I love my 80 prs but I’m running active. I plan on going into a dsp eventually when I switch back to passive to add another set of speakers and judging from your experience I think I might go audiocontrol too <img src="> LOL i hear you brother. Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
White Lightning Posted February 21, 2019 Report Share Posted February 21, 2019 I love my Helix ... just Saying Kenwood / HELIX / Linear Power (For The Love Of Music) / Brutal Sounds / OverKill Electric Co Questions About Sound Quality ?? Try Here ... Sound Quality, What does it REALLY mean ?? SMD SOTM Winner "White Lightning" 1997 GMT400 Chevy Silverado "The Green Dickle" 1994 GMT400 Chevy "Phantom Dually" Randal's 2007 Chevy Avalanche (we haven't named this one yet) Dylan's "Brutal" 17 Chevy Cruze RS Hatch Link to comment Share on other sites More sharing options...
DTS909 Posted March 31, 2019 Report Share Posted March 31, 2019 I just put a audiocontrol D-4.800 in my 2013 accord. On the non premium radio and have no complaints. Well just 1 with the great turn on for remote signal. The stock head unit has a constant single coming out of it so when I turn the radio off the amps stay on until I turn the key off. Good thing I ran 2 9packs of speedwire 1 for signal and the other I used to put the amps on a switch. I would think you would just have to run the radio eq flat and let the dsp do the rest. One thing I would recommend is to give all the doors and the trunk some sound deadening treatment. Complete night and day difference in a honda. And seal up the the 2 maintenance access openings in the front doors with some abs, pvc, or some type of plastic sheet. I had some extra plastic clothes drawers laying around. Used the biggest side and cut to fit each opening. Took the foil off a sheet of some sound deadening and cut and rolled into sticky rope. Used that to keep the plastic peices in place and sound treated over that. Works great so far. VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
LT.Smoke Posted March 31, 2019 Report Share Posted March 31, 2019 Audio Control or Audison BitOne Team MaxRetribution Si Vis Pacem Parabellum Id rather be judged by 12 than carried by 6 Bowhunting- Life Begins and Ends at Full Draw Bowhunting Team Fatal Trajectory Hunt Team http://www.stevemeadedesigns.com/board/topic/49335-sick96vtecaccords-t-line-build/?hl=sick96vtecaccord << Accord Build http://www.stevemeadedesigns.com/board/topic/68498-smokedout08impalas-tline-build/?hl=+sick96vtecaccord << Impala T-line build Rebassed.com for all your music needs 👌 Link to comment Share on other sites More sharing options...
Kris4b11 Posted March 31, 2019 Author Report Share Posted March 31, 2019 14 hours ago, DTS909 said: I just put a audiocontrol D-4.800 in my 2013 accord. On the non premium radio and have no complaints. Well just 1 with the great turn on for remote signal. The stock head unit has a constant single coming out of it so when I turn the radio off the amps stay on until I turn the key off. Good thing I ran 2 9packs of speedwire 1 for signal and the other I used to put the amps on a switch. I would think you would just have to run the radio eq flat and let the dsp do the rest. One thing I would recommend is to give all the doors and the trunk some sound deadening treatment. Complete night and day difference in a honda. And seal up the the 2 maintenance access openings in the front doors with some abs, pvc, or some type of plastic sheet. I had some extra plastic clothes drawers laying around. Used the biggest side and cut to fit each opening. Took the foil off a sheet of some sound deadening and cut and rolled into sticky rope. Used that to keep the plastic peices in place and sound treated over that. Works great so far. Thank you for the advice and info. I am using a high/low I purchased from a member on a accord forum. It plugs into the harness before the factory amp (I have a exl v6 with the so called premium audio) it also provides the remote turn on for my amps. I am currently running all B2 audio amps, just installed a set of B2 ISX components (replacing some pro audio speakers i previously installed). I have a layer of sound skin in each door and i also used closed cell foam to cover the outer side of the door (in between the door and door panel) I purchased a DM-810 since creating this thread. I have not installed it yet. I completely gutted out the system and reinstalling everything, changing a few things around and placement for amps and making room for the processor and crossovers for the the components. Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
ToNasty Posted March 31, 2019 Report Share Posted March 31, 2019 Helix or mosconi. End of thread. Helix in my opinion are the best dsp Audiocontrol is great but meh, audison bit ones are good when they work (hint hint) But helix and mosconi always works ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Kris4b11 Posted March 31, 2019 Author Report Share Posted March 31, 2019 5 minutes ago, ToNasty said: Helix or mosconi. End of thread. Helix in my opinion are the best dsp Audiocontrol is great but meh, audison bit ones are good when they work (hint hint) But helix and mosconi always works Yea I hear you. If funds were in order and I wasn't saving for a wedding as well, Helix or Mosconi would be on top of the list ( especially if they have the main thing im looking for which was input summing etc.) At the price I snagged the DM-810 it was hard to pass up that deal. Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
DTS909 Posted March 31, 2019 Report Share Posted March 31, 2019 I made some 1/2" mdf boards that are screwed down with rivet nuts in the trunk on each side under the upholstery where I mounted my amps. I also got a mdf board under the back deck where I have 4 crossovers mounted. I dismantled the crossovers and hot glued them down better to kill the rattles.I also made 3/4mdf false floor that sits in front of the spare mounted down with rivets insert where my box will sit. I will be making a hole in the arm rest for the port to fire thru of a 4th order. If you have after market rims you can put a battery in the spare tire spot. I got a xs R5100 there and 1 of the original tires for a spare. you just have to shave off the spare tire mount piece of metal. Its layed on its side with terminals faced back. All the wires have space on each side of the spare to run in an out with no rubbing. Shoot me your number in a private message and send some pictures if you want. VM-1 Pioneer DEH-80PRS Hertz HSK 165XL Arc Audio KS 300.2 Linear Power 1002 Full Mods Fi Audio Q 10s Sundown Audio Scv 3000 Big 3 XS Power D5100 Juice Box 20AH Singer Alternator Sky High Wire <p>My Ebay feedback. http://feedback.ebay...tab=AllFeedback Link to comment Share on other sites More sharing options...
ToNasty Posted March 31, 2019 Report Share Posted March 31, 2019 1 hour ago, Kris4b11 said: Yea I hear you. If funds were in order and I wasn't saving for a wedding as well, Helix or Mosconi would be on top of the list ( especially if they have the main thing im looking for which was input summing etc.) At the price I snagged the DM-810 it was hard to pass up that deal. How many channels do you need because the dm 810 is more expensive than the helix and mosconi ***Super Sellers List***http://www.stevemeadedesigns.com/board/topic/25829-super-sellers-buyers Link to comment Share on other sites More sharing options...
Kris4b11 Posted April 1, 2019 Author Report Share Posted April 1, 2019 18 hours ago, DTS909 said: I made some 1/2" mdf boards that are screwed down with rivet nuts in the trunk on each side under the upholstery where I mounted my amps. I also got a mdf board under the back deck where I have 4 crossovers mounted. I dismantled the crossovers and hot glued them down better to kill the rattles.I also made 3/4mdf false floor that sits in front of the spare mounted down with rivets insert where my box will sit. I will be making a hole in the arm rest for the port to fire thru of a 4th order. If you have after market rims you can put a battery in the spare tire spot. I got a xs R5100 there and 1 of the original tires for a spare. you just have to shave off the spare tire mount piece of metal. Its layed on its side with terminals faced back. All the wires have space on each side of the spare to run in an out with no rubbing. Shoot me your number in a private message and send some pictures if you want. Sounds awesome! I originally planned to install my amps on each side of the trunk floor (right next to the rails that run front to back) But it would still leave me without a place for the 3rd amp. I used 1/2 birch and made another floor that sits over the spare and holds the 3 amps. The rack is supported with a piece of 3/4 birch from the bottom that sits on the inside of the lip of the spare and used rivnuts to secure brackets on each side. The amp rack covers half of the spare but can lift up to pull the spare out. I also want to cut out the ski hole. As far as secondary battery, I want to get a limitless and mount it to the side Factory double din navi unit with 30gb internal Crescendo bc3500 DD 9512i Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.