Joshdashef Posted March 28, 2019 Report Share Posted March 28, 2019 Check out singer or us alts they might be able to get you one that can fit and is more I honestly wish I went with singer alts instead of Mechman. Both are great brands though SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
DiBo Posted March 28, 2019 Report Share Posted March 28, 2019 2 hours ago, Sackcheese said: Wish I could do more alts, I'd deff get even just one 370 mecman, but it's a nissan murano and just cannot fit anything larger than the 240 or 270 mecman. I have a large budget 20k for all equipment and install. would 2 limitless lithium 100 amp hours be easier on the alt? 2x JY cased 80's and 3 banks of caps would be dope. Or 160ah of yinlong and caps... If you have large budget grab nice lithium and be done with it. Higher resting voltage and a nice 10c discharge. You're electrical will be stout AF. Try to fit that 270. Jmo Link to comment Share on other sites More sharing options...
DiBo Posted March 28, 2019 Report Share Posted March 28, 2019 1 hour ago, Joshdashef said: Check out singer or us alts they might be able to get you one that can fit and is more I honestly wish I went with singer alts instead of Mechman. Both are great brands though I like my Mechman 270 in my Maxima over my singer 320 in my navigator. Link to comment Share on other sites More sharing options...
Joshdashef Posted March 28, 2019 Report Share Posted March 28, 2019 12 hours ago, DiBo said: I like my Mechman 270 in my Maxima over my singer 320 in my navigator. Since you have experience with both. Why is that ? I only have the mechman to go off of I’m curious SMD Tool Map (2022): https://www.stevemeadedesigns.com/board/topic/220267-smd-tool-map-2022/ My Port Size Calculator (in progress): https://www.stevemeadedesigns.com/board/topic/217087-port-size-calculator-in-progress/ Common Port Walls for a Slot Port: https://www.stevemeadedesigns.com/board/topic/217076-common-port-walls-why-it-matters-to-your-box/?tab=comments#comment-3240313 Link to comment Share on other sites More sharing options...
Smoove Posted March 28, 2019 Report Share Posted March 28, 2019 On 3/26/2019 at 9:04 PM, Joshdashef said: I’ve been looking into getting lithium. From what I can tell it is cheaper to build your own but that comes with the inherent risks of us average joes building a battery pack with no experience. I’d rather stick to more expensive options that have been established already, outdated yes, but I’ve been on the gun towards 45 ah of eithier JY or limitless lithium. Just contacted JY and they said they were out of stock for 45 ah but I believe they have an 80 ah and they have options for 12/14/16 volt banks. Limitless might too haven’t checked. JY has some new stuff coming if you can wait. The pricing on the new stuff is also better than the new. 2 Team Fi 15's v1 2 DD M5's 970amps of Alt 6th order blowthroughThe truck Blowthrough build : http://www.stevemeadedesigns.com/board/topic/155555-smooves-1996-chevy-ext-cab-c1500-slow-build/The 350z build : http://www.stevemeadedesigns.com/board/topic/170694-smooves-2003-nissan-350z/ My FB page https://www.facebook.com/pages/Smooves-Car-Audio-and-performance/719746144805343 Team Fi Audio http://www.ficaraudio.com/ Link to comment Share on other sites More sharing options...
DiBo Posted March 28, 2019 Report Share Posted March 28, 2019 19 minutes ago, Joshdashef said: Since you have experience with both. Why is that ? I only have the mechman to go off of I’m curious Simply because the Mechman in my Maxima has never given me any problems. When I burnt out my singer I had it repaired at alternator Depot here in Las Vegas and they had quite a lot to say about the internals in my singer. Off-the-shelf Chinese parts is what I was told. They told me they are familiar with Mechman alternators and Mechman uses better parts. Actually denso parts not knock off denso Link to comment Share on other sites More sharing options...
DiBo Posted March 28, 2019 Report Share Posted March 28, 2019 Just now, Smoove said: JY has some new stuff coming if you can wait. The pricing on the new stuff is also better than the new. JY is casing lithium titanate oxide cells I heard. LTO. Lifepo4 is the old... Lithium titanium oxide is the new. Link to comment Share on other sites More sharing options...
Sackcheese Posted March 28, 2019 Author Report Share Posted March 28, 2019 Thanks fellas:) Link to comment Share on other sites More sharing options...
Wishuponasub Posted March 28, 2019 Report Share Posted March 28, 2019 6 hours ago, DiBo said: Simply because the Mechman in my Maxima has never given me any problems. When I burnt out my singer I had it repaired at alternator Depot here in Las Vegas and they had quite a lot to say about the internals in my singer. Off-the-shelf Chinese parts is what I was told. They told me they are familiar with Mechman alternators and Mechman uses better parts. Actually denso parts not knock off denso I've heard the opposite of mechman. I guess it's just who you talk to. Sitting around waiting to be installed: 4 FI X 10 270 CES alt D3400/73ah lithium AA 3800.1 (2) AA 75.4 Link to comment Share on other sites More sharing options...
Kyblack76 Posted March 28, 2019 Report Share Posted March 28, 2019 I ran a dc 10k at .5 on 4 7500's and a singer 350 OG slot wound for a long time. Id run the shit outta it..... (10k does much gooder than the 9k at 12v,... 9k shines upper) SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.