SUPAWHITETC Posted April 26, 2019 Report Share Posted April 26, 2019 I would like you guys to review my design. I never used any type of sketch program so, I only have the dimensions. I used Torres for the design 2.0 @ 32 hz with 1600 rms 14.5h x 32w x 18d port 13h x 3.5w at 57L physical port 47L port area 45.5, 22.66 port area/foot, 1:3.71 port ratio .15 sub displacement with double baffle and 3 common port panels cut sheet: top/bottom 32 x 18 Front panel 27.75 x 23 extra baffle 26.25 x 13 L panel 17.25 x 13 R panel 16.5 x 13 Back panel 32 x 13 port #1 13 x 13 port #2 22.75 x 13 port #3 9 x 13 Link to comment Share on other sites More sharing options...
SUPAWHITETC Posted May 1, 2019 Author Report Share Posted May 1, 2019 Anyone have any advice? Is the port too big? I read that Skar recommends 24 inches squares for port area. But doing research with the sub on 1600 watts 46 square inches at 32hz is recommended. Just not sure how to build the port. Would making the port bigger than what the manufacturer recommends make it play loude/lower? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.